ASTM F1511-09
Standard Specification for Mechanical Seals for Shipboard Pump Applications
- Standard No.
- ASTM F1511-09
- Release Date
- 2009
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM F1511-11
- Latest
- ASTM F1511-18(2023)
- Scope
1.1 This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use.
1.2 The following types of seals are not included in this specification: lip seals, oil seals, circumferential seals, or labyrinth seals.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. A companion hard metric standard is in the process of preparation.
1.4 Special requirements for U.S. Navy Shipboard Pump Applications are included in Supplement S1.
ASTM F1511-09 Referenced Document
- ASTM A108 Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality
- ASTM A276 Standard Specification for Stainless Steel Bars and Shapes
- ASTM A436 Standard Specification for Austenitic Gray Iron Castings
- ASTM A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
- ASTM B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
- ASTM B166 Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Cop
- ASTM B168 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Mo
- ASTM B271 Standard Specification for Copper-Base Alloy Centrifugal Castings
- ASTM B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
- ASTM B335 Standard Specification for Nickel-Molybdenum Alloy Rod
- ASTM B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
- ASTM B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets*， 2024-04-19 Update
- ASTM B367 Standard Specification for Titanium and Titanium Alloy Castings
- ASTM B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip
- ASTM B446 Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
- ASTM B472 Standard Specification for Nickel Alloy Billets and Bars for Reforging
- ASTM B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
- ASTM B584 Standard Specification for Copper Alloy Sand Castings for General Applications
- ASTM B62 Standard Specification for Composition Bronze or Ounce Metal Castings
- ASTM B637 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
- ASTM B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
- ASTM D1141 Standard Practice for the Preparation of Substitute Ocean Water
- ASTM D1418 Standard Practice for Rubber and Rubber Latices-Nomenclature
- ASTM D3294 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
- ASTM D3951 Standard Practice for Commercial Packaging
- ISO 9001 Quality management systems - Requirements [Spanish version]
- SAE AMS3216 FLUOROCARBON RUBBER Fuel and Oil Resistant 70 - 80
- SAE AMS3218 Fluorocarbon (FKM) Rubber; High-Temperature-Fluid Resistant; Low Compression Set 85 to 95
- SAE AMS7259 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid Resistant Very-Low Compression Set FKM Type 85-95
- SAE AMS7276 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant, Very-Low-Compression-Set FKM Type 70 - 80
ASTM F1511-09 history
- 2023 ASTM F1511-18(2023) Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2018 ASTM F1511-18 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2016 ASTM F1511-16 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2014 ASTM F1511-14 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2013 ASTM F1511-13 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2011 ASTM F1511-11 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2009 ASTM F1511-09 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2007 ASTM F1511-07 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2006 ASTM F1511-06 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2005 ASTM F1511-05 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2004 ASTM F1511-04 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2003 ASTM F1511-03 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 2002 ASTM F1511-02 Standard Specification for Mechanical Seals for Shipboard Pump Applications
- 1998 ASTM F1511-98 Standard Specification for Mechanical Seals for Shipboard Pump Applications
