ASTM F1511-18
Standard Specification for Mechanical Seals for Shipboard Pump Applications

Standard No.

ASTM F1511-18

Release Date

2018

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM F1511-18(2023)

Latest

ASTM F1511-18(2023)

Scope

1.1 This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use. 1.2 The following types of seals are not included in this specification: lip seals, oil seals, circumferential seals, or labyrinth seals. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. A companion hard metric standard is in the process of preparation. 1.4 Special requirements for U.S. Navy Shipboard Pump Applications are included in Supplement S1. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM F1511-18 Referenced Document

• ASTM A108 Standard Specification for Steel Bars, Carbon, Cold-Finished, Standard Quality
• ASTM A182/A182M Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
• ASTM A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
• ASTM A276 Standard Specification for Stainless Steel Bars and Shapes
• ASTM A313/A313M Standard Specification for Stainless Steel Spring Wire
• ASTM A351/A351M Standard Specification for Castings, Austenitic, Austenitic- Ferritic (Duplex), for Pressure-Containing Parts
• ASTM A436 Standard Specification for Austenitic Gray Iron Castings*， 2020-05-01 Update
• ASTM A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy*， 2022-03-01 Update
• ASTM A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
• ASTM A579/A579M Standard Specification for Superstrength Alloy Steel Forgings*， 2020-03-01 Update
• ASTM A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
• ASTM A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
• ASTM B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
• ASTM B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
• ASTM B166 Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Cop*， 2024-04-01 Update
• ASTM B168 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Mo*， 2019-05-01 Update
• ASTM B271 Standard Specification for Copper-Base Alloy Centrifugal Castings
• ASTM B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
• ASTM B335 Standard Specification for Nickel-Molybdenum Alloy Rod
• ASTM B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
• ASTM B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets*， 2024-04-22 Update
• ASTM B367 Standard Specification for Titanium and Titanium Alloy Castings
• ASTM B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip*， 2019-11-01 Update
• ASTM B446 Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar*， 2023-11-01 Update
• ASTM B472 Standard Specification for Nickel Alloy Billets and Bars for Reforging*， 2023-12-01 Update
• ASTM B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
• ASTM B505/B505M Standard Specification for Copper Alloy Continuous Castings
• ASTM B584 Standard Specification for Copper Alloy Sand Castings for General Applications*， 2022-10-01 Update
• ASTM B62 Standard Specification for Composition Bronze or Ounce Metal Castings
• ASTM B637 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
• ASTM B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
• ASTM D1141 Standard Practice for the Preparation of Substitute Ocean Water
• ASTM D1418 Standard Practice for Rubber and Rubber Latices-Nomenclature
• ASTM D3294 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
• ASTM D3951 Standard Practice for Commercial Packaging
• ISO 9001 Quality management systems - Requirements [Spanish version]
• SAE AMS3216 FLUOROCARBON RUBBER Fuel and Oil Resistant 70 - 80
• SAE AMS3218 Fluorocarbon (FKM) Rubber; High-Temperature-Fluid Resistant; Low Compression Set 85 to 95
• SAE AMS7259 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid Resistant Very-Low Compression Set FKM Type 85-95
• SAE AMS7276 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant, Very-Low-Compression-Set FKM Type 70 - 80

ASTM F1511-18 history

• 2023 ASTM F1511-18(2023) Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2018 ASTM F1511-18 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2016 ASTM F1511-16 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2014 ASTM F1511-14 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2013 ASTM F1511-13 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2011 ASTM F1511-11 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2009 ASTM F1511-09 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2007 ASTM F1511-07 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2006 ASTM F1511-06 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2005 ASTM F1511-05 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2004 ASTM F1511-04 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2003 ASTM F1511-03 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 2002 ASTM F1511-02 Standard Specification for Mechanical Seals for Shipboard Pump Applications
• 1998 ASTM F1511-98 Standard Specification for Mechanical Seals for Shipboard Pump Applications