General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 23923-2009
Scope
This standard specifies the technical requirements, test methods, inspection rules, signs and packaging of alternators, permanent magnet constant voltage generators, flywheel generators and tensioner generators (hereinafter referred to as generators) for three-wheeled vehicles and low-speed trucks. , storage and safekeeping, model compilation rules. This standard applies to alternators, permanent magnet constant voltage generators, flywheel generators and tensioner generators used in three-wheeled vehicles and low-speed trucks. When the generator is working, it should be used in conjunction with the corresponding voltage regulator. When the voltage regulator is working, it should be connected in parallel with the battery.
GB/T 23923-2009 Referenced Document
GB 18655 Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles
GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 17619 Limits and methods of testing for immunity of electrical/electronic sub--asseblies in vehicles to electromagnetic radiation
GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
GB/T 2423.22-2002 Environmental testing for electric and electronic products--Part 2: Test methods Test N: Change of temperature
GB/T 2423.34-2005 Environmental testing for electric and electronic products.Part 2:Test Methods Test Z/AD:Composite temperature/humidity cyclic test
GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*, 2013-02-15 Update
GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
JB/T 6697-2006 Basic specifications of electric equipment for motor vehicles and internal-combustion engine
JB/T 6698 Installation dimensions of permanent magnetic generators applied for motor vehicles and internal-combustion engine
JB/T 6700 Installation dimensions of AC generators applied for motor vehicles and interna-combustion engine
QC/T 625 Metallic coatings and conversion coatings for automobile*, 2013-04-25 Update
GB/T 23923-2009 history
2009GB/T 23923-2009 Tri-wheel vehicles and low-speed goods vehicles.Generator