This European Standard specifies requirements for continuously electrolytic zinc coated cold rolled flat
products of low carbon steels suitable for cold forming according to Table 1 in rolled widths ≥ 600 mm and
thicknesses from 0,35 mm up to and including 3 mm, delivered as strip (in coil form), sheet, slit strip or cut
lengths obtained from slit strip or sheet.
NOTE 1 This European Standard can also be applied to continuously electrolytic zinc coated flat products of:
a) steels according to EN 10139 (cold rolled strip in rolled widths < 600 mm),
b) steels normally characterized by minimum yield strength or minimum tensile strength values in addition to formability
parameters, e. g.
1) steels with high yield strength and improved formability according to EN 10268 (cold rolled flat products),
2) multiphase steels (cold rolled or hot rolled) according to prEN 10338,
3) steels for construction according to national or regional standards (see e. g. DIN 1623).
NOTE 2 By agreement at the time of enquiry and order this European Standard can be applied to continuously
electrolytic zinc coated hot-rolled steel flat products (e.g. according to EN 10025-1 and -2, EN 10111, EN 10149-1 to EN
10149-3, etc.).
NOTE 3 As the mass of the zinc coating applied is relatively small, the material is not intended to withstand outside
exposure without further chemical treatment and painting.
BS EN 10152:2009 Referenced Document
EN 10002-1:2001 Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products*， 2024-04-19 Update
EN 10027-1 Designation Systems for Steels - Part 1: Steel Names
EN 10027-2 Designation systems for steels - Part 2: Numerical system*， 2015-04-01 Update
EN 10051 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape*， 2024-04-19 Update
EN 10131 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10204:2004 Metallic products - Types of inspection documents*， 2024-04-19 Update
EN ISO 7438 Metallic materials - Bend test (ISO 7438:2020)*， 2020-10-21 Update
ISO 10113 Metallic materials — Sheet and strip — Determination of plastic strain ratio*， 2020-01-27 Update
ISO 10275 Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent*， 2020-08-19 Update
BS EN 10152:2009 history
0000 BS EN 10152:2017(2018)
2017BS EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
2009BS EN 10152:2009 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions