- Standard No.
- GB/T 22363-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
-
GB/T 22363-2008
- Replace
-
GB/T 2679.4-1994
GB/T 2679.9-1993
- Scope
- This standard specifies a method for the determination of the roughness of paper and board using the Bendtsen method and the printed surface method. The Bendtsen method is suitable for paper and paperboard with a Bendtsen roughness value of about 50mL/min~1200mL/min. It is not suitable for soft papers where the end face of the probe will produce obvious indentations in the paper surface, nor for highly air-permeable papers where air will penetrate the paper, or papers that do not lay flat under heavy metal rings. The printed surface method is suitable for all printed papers and cardboards that form a good seal with the protective ring surface of the probe.
GB/T 22363-2008 Referenced Document
- GB/T 10739 Standard atmospheric conditions for handling and testing of paper, paperboard and pulp specimens*, 2023-12-28 Update
- GB/T 450 Paper and board.Sampling for testing and identification of machine and cross direction,wire side and felt side
GB/T 22363-2008 history
- 2008 GB/T 22363-2008 Paper and board.Determination of roughness(air leak methods).Bendtsen method and print-surf method
- 1994 GB/T 2679.4-1994 Paper and board-Determination of the roughness(Bendtsen method)
- 1993 GB/T 2679.9-1993 Paper and board.Determination of roughness(Print-surface method)
GB/T 22363-2008 Paper and board.Determination of roughness(air leak methods).Bendtsen method and print-surf method has been changed from GB/T 2679.4-1994 Paper and board-Determination of the roughness(Bendtsen method).
GB/T 22363-2008 Paper and board.Determination of roughness(air leak methods).Bendtsen method and print-surf method has been changed from GB/T 2679.9-1993 Paper and board.Determination of roughness(Print-surface method).