ASTM D228-08
Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

Standard No.
ASTM D228-08
Release Date
2008
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D228/D228M-09
Latest
ASTM D228/D228M-21
Scope

These test methods include procedures for sampling, examination, physical testing, and analyses of asphalt roll roofing, cap sheets, and shingles used in roofing and waterproofing. Other components of these materials are allowed to include, but are not limited to, felts, mats, films, foils, mineral stabilizers, papers, and mineral surfacing.

These test methods include tests that are not required by every product standard that references Test Methods D 228. The individual product standards are the authority for which tests are required for compliance. It is not prohibited to run tests in addition to those required in the product standards, but these test methods make no claim to their suitability or significance.

Five random samples are required from lots equal to or less than 1000 packages. The number of samples required for lots greater than 1000 packages is dependent on the variation in the unit mass within the lot and is determined by the two-step sampling plan in 6.4.

The results of a visual examination, physical testing, and compositional analysis are required for each sample. The analytical data are further used to compute the probable minimum and the probable range for the average mass of each of the components.

1.1 These test methods cover procedures for sampling, examination, physical testing, and analyses of asphalt-containing materials used in roofing and waterproofing. These materials include but are not limited to roll roofing, cap sheets, and shingles. Any of these materials are allowed to be partially or fully coated, surfaced, or laminated, or a combination thereof.

1.2 The test methods and procedures in this standard appear in the following order:

SectionContent
5Types of Roofing
6Sampling
7Mass and Area Determination
8Selection of Representative Specimens
9Moisture
10Pliability
11Mass Loss and Behavior on Heating
12Tear Strength
13Fastener Pull-Through Resistance
14Preparation and Selection of Small Test Specimens
for Analyses
15Analysis of Glass Felt Products
16Analysis of Roofing Products with Organic Felts
17Ash of Desaturated Felt
18Calculation
19Adjusting Back Coating Fine Mineral Matter and
Back Surfacing
20Report
21Precision and Bias

1.3 The values stated in SI units are to be regarded as the standard. The values gi......

ASTM D228-08 Referenced Document

  • ASTM D1079 Standard Terminology Relating to Roofing and Waterproofing
  • ASTM D146 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
  • ASTM D1922 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • ASTM D2178 Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
  • ASTM D225 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
  • ASTM D2626 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
  • ASTM D3462 Standard Specification for Asphalt Shingles Made From Glass Mat And Surfaced With Mineral Granules
  • ASTM D3909 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
  • ASTM D4601 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
  • ASTM D4897 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
  • ASTM D4932 Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
  • ASTM D6380 Standard Specification for Asphalt Roll Roofing (Organic Felt)
  • ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples*， 2024-04-19 Update

ASTM D228-08 history

  • 2021 ASTM D228/D228M-21 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2019 ASTM D228/D228M-19a Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2019 ASTM D228/D228M-19 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2018 ASTM D228/D228M-18 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2016 ASTM D228/D228M-16 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2015 ASTM D228/D228M-15 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2009 ASTM D228/D228M-09(2014) Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2009 ASTM D228/D228M-09e2 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2009 ASTM D228/D228M-09e1 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2009 ASTM D228/D228M-09 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2008 ASTM D228-08 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2006 ASTM D228-06 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2005 ASTM D228-05b Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2005 ASTM D228-05a Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2005 ASTM D228-05 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2004 ASTM D228-04 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2003 ASTM D228-03a Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2003 ASTM D228-03 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2002 ASTM D228-02 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2001 ASTM D228-01 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • 2000 ASTM D228-00B Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing


Copyright ©2024 All Rights Reserved