GB/T 22159.3-2008
Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient element.Part 3:Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (English Version)
- Standard No.
- GB/T 22159.3-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 22159.3-2008
- Scope
- This section details a method for measuring the translational dynamic stiffness of an elastic support under a given preload condition. The method mainly involves the laboratory measurement of the vibration transmissibility, known as the profile measurement method. This method is suitable for test parts with parallel connections. The applicable frequency range of this measurement method is f2～f3 obtained by using the method in this part. The values of f2 and f3 depend on the test device and the vibration isolator to be tested, usually 20Hz≤f2≤50Hz; 2kHz≤f3≤5kHz. The measurement data obtained by the methods in this part can be used for: - product information provided by manufacturers and suppliers; - information required in the product development process; - quality control: - calculation of the vibration transmission rate through the vibration isolator .
GB/T 22159.3-2008 Referenced Document
- GB/T 11349.1-2006 Vibration and shock.Experimental determination of mechanical mobility.Part 1: Basic definitions and transducers
- GB/T 13823.3-1992 Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation
- GB/T 14412-2005 Mechanical vibration and shock.Mechanical mounting of accelerometers
- GB/T 2298-1991 Mechanical vibration and shock-Terminology
- GB/T 3240 Preferred frequencies for the acoustical measurement
GB/T 22159.3-2008 history
- 2008 GB/T 22159.3-2008 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient element.Part 3:Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 22159.3-2008 -All Parts
GB/T 22159.1-2012 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient elements.Part 1:Principles and guidelines
GB/T 22159.2-2012 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient elements.Part 2:Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 22159.3-2008 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient element.Part 3:Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 22159.4-2017 Acoustics and vibration―Laboratory measurement of vibro-acoustic transfer properties of resilient elements―Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
GB/T 22159.5-2017 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion