GB/T 14819-2008
General specification for wound fiele DC servomotors (English Version)
- Standard No.
- GB/T 14819-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2021-07
- Replace By
- GB/T 39553-2020
- Latest
- GB/T 39553-2020
- Replace
- GB/T 14819-1993
- Scope
- This standard specifies the classification, technical requirements, test methods, inspection rules, signs, packaging, transportation, storage, etc. of electromagnetic DC servo motors. This standard is applicable to electromagnetic DC servo motors with an outer diameter of the frame not greater than 160mm. Electromagnetic DC servo motors with an outer diameter of the frame greater than 160mm can be used as a reference. The specific technical indicators and special requirements of various electromagnetic DC servo motors (hereinafter referred to as motors) are stipulated in the special technical conditions and used together with this standard.
GB/T 14819-2008 Referenced Document
- GB 17799.3 General standards for electromagnetic compatibility Part 3: Emissions from equipment in residential environments*， 2023-12-28 Update
- GB 17799.4 Electromagnetic compatibility (EMC)—Generic standards—Part 4: Emission for industrial environments*， 2022-10-12 Update
- GB 18211 General requirements for safety of electrical micro-machines
- GB 755 Rotating electrical machines.Rating and performance*， 2008-06-19 Update
- GB/T 10069.1 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
- GB/T 10761 General requirements for tropical electrical micro-machine
- GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*， 2022-07-11 Update
- GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
- GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature*， 2012-12-31 Update
- GB/T 2423.25 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests*， 2008-12-30 Update
- GB/T 2423.26 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests*， 2008-12-30 Update
- GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
- GB/T 6113.2 Methods of measurement of radio disturbance and immunity
- GB/T 7345 Basic technical requirements for motor control*， 2008-06-30 Update
- GB/T 7346 Basic outline constructional type for control motors and feedback components*， 2015-05-15 Update
- JB/T 8162 Control motor packaging technical conditions*， 2016-01-15 Update
GB/T 14819-2008 history
- 2020 GB/T 39553-2020 General specification for DC servo motors
- 2008 GB/T 14819-2008 General specification for wound fiele DC servomotors
- 1993 GB/T 14819-1993 General specification for wound field DC servomotors
GB/T 14819-2008 General specification for wound fiele DC servomotors was changed to GB/T 39553-2020 General specification for DC servo motors.
