GB/T 39553-2020
General specification for DC servo motors (English Version)
- Standard No.
- GB/T 39553-2020
- Language
- Chinese, Available in English version
- Release Date
- 2020
- Published By
- 国家市场监督管理总局、中国国家标准化管理委员会
- Latest
- GB/T 39553-2020
- Replace
- GB/T 14817-2008 GB/T 14818-2008 GB/T 14819-2008
- Scope
- This standard specifies the classification technical requirements and test methods, inspection rules, delivery preparations and user services of DC servo motors. This standard applies to the design, manufacture, inspection and acceptance of DC servo motors (hereinafter referred to as "motor 2") with an outer diameter of the frame not greater than 320 mm. Motors with an outer diameter of the frame greater than 320 mm can be used for reference.
GB/T 39553-2020 Referenced Document
- GB 17799.3 General standards for electromagnetic compatibility Part 3: Emissions from equipment in residential environments*， 2023-12-28 Update
- GB 17799.4 Electromagnetic compatibility (EMC)—Generic standards—Part 4: Emission for industrial environments*， 2022-10-12 Update
- GB/T 10069.1 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
- GB/T 18211 General requirements for safety of electrical micro-machines
- GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
- GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*， 2022-07-11 Update
- GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
- GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
- GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature
- GB/T 2423.25 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
- GB/T 2423.26 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
- GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
- GB/T 6113.203 Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3: Methods of measurement of disturbances and immunity—Radiated disturbance measurements
- GB/T 6113.204 Specification for radio disturbance and immunity measuring apparatus and methods.Part 2-4:Methods of measurement of disturbances and immunity.Immunity measurements
- GB/T 7345 Basic technical requirements for motor control
- GB/T 7346 Basic outline constructional type for control motors and feedback components
GB/T 39553-2020 history
- 2020 GB/T 39553-2020 General specification for DC servo motors
- 2008 GB/T 14819-2008 General specification for wound fiele DC servomotors
- 1993 GB/T 14819-1993 General specification for wound field DC servomotors
GB/T 39553-2020 General specification for DC servo motors has been changed from GB/T 14817-2008 General specification for permanent magnet DC servomotors.
GB/T 39553-2020 General specification for DC servo motors has been changed from GB/T 14818-2008 General specification for DC servomotors with wounded disc armature.
GB/T 39553-2020 General specification for DC servo motors has been changed from GB/T 14819-2008 General specification for wound fiele DC servomotors.
