GB/T 14598.8-2008
Electrical relays.Part 20:Protection systems (English Version)

Standard No.
GB/T 14598.8-2008
Language
Chinese, Available in English version
Release Date
2008
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 14598.8-2008
Replace
GB/T 14598.8-1995
Scope
This part of GB/T 14598 specifies the performance requirements of the protection system and its components. This section applies to protective devices in protection systems and devices connected to protective devices that affect their performance. This section applies to the following objects: — manufacturers of protection systems or their components; — users of protection systems; — manufacturers of control panels; — installers of electrical equipment; — consultant engineers. Various IEC standards specify the technical requirements for the various components of the protection system, and these standards are quoted in the relevant parts of this Part. Appendix A lists a block diagram of a protection system, which also shows the relevant IEC technical committees that develop technical specifications for the various components of the protection system. The user is advised to make decisions consistent with the provisions of the technical committees involved which are responsible for the protection system as a whole.

GB/T 14598.8-2008 Referenced Document

  • GB 1207-2006 Inductive voltage transformers
  • GB/T 14047 Measuring relays and protection equipment
  • GB/T 14598.1 Electrical relays--Part 23: Contact performance
  • GB/T 14598.13 Electrical relays.Part 22-1:Electrical disturbance tests for measuring relays and protection equipment.1 MHz burst immunity tests
  • GB/T 14598.3-2006 Electrical relays.Part 5:Insulation coordination for measuring relays and protection equipment.Requirements and tests
  • GB/T 14598.7 Electrical relays. Part 3: Single input energizing quantity measuring relays with dependent or independent time
  • GB/T 15166.1 High-voltage alternating-current fuses—Part 1:Terminology*2019-06-04 Update
  • GB/T 15166.2 High Voltage AC Fuses Part 2: Current Limiting Fuses*2023-09-07 Update
  • GB/T 15166.3 High Voltage AC Fuses Part 3: Jet Fuses*2023-03-17 Update
  • GB/T 15166.4 High-voltage alternating-current fuses—Part 4:Fuse for exteanal protection of shunt capacitors*2021-12-31 Update
  • GB/T 15166.5 High-voltage AC fuses-Part 5: Guidelines for the selection of fuses for high-voltage fuses for motor circuits*2022-12-30 Update
  • GB/T 15166.6 High-voltage AC fuses-Part 6: Guidelines for the selection of fuses for high-voltage fuses for transformer circuits*2023-03-17 Update
  • GB/T 2900.49-2004 Electrotechnical terminology Power system protection
  • GB/T 8367 Interruptions to and alternating component(ripple) in d.c auxiliary energizing quantity of measuring relays

GB/T 14598.8-2008 history

Electrical relays.Part 20:Protection systems

GB/T 14598.8-2008 -All Parts

GB/T 14598.1-2002 Electrical relays--Part 23: Contact performance GB/T 14598.10-2012 Measuring relays and protetion equipment.Part 22-4:Electrical disturbance tests.Electrical fast transient/burst immunity test GB/T 14598.11-2011 Measuring relays and protection equipment.Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port GB/T 14598.118-2021 Measuring relays and protection equipment—Part 118: Synchrophasor for power systems—Measurements GB/T 14598.12-1998 Electrical relays. Part 19: Blank detail specification. Electromechanical all-or-nothing relays of assessed quality. Test schedules 1,2 and 3 GB/T 14598.121-2017 Measuring relays and protection equipment—Part 121:Functional requirements for distance protection GB/T 14598.127-2013 Measuring relays and protection equipment.Part 127:Functional requirements for over/under voltage protection GB/T 14598.13-2008 Electrical relays.Part 22-1:Electrical disturbance tests for measuring relays and protection equipment.1 MHz burst immunity tests GB/T 14598.14-2010 Measuring relays and protection equipment.Part 22-2:Electrical disturbance tests.Electrostatic discharge tests GB/T 14598.149-2016 Measuring relays and protection equipment.Part 149:Functional requirements for thermal electrical relays GB/T 14598.15-1998 Electrical relays. Part 8:Thermal electrical relays GB/T 14598.151-2012 Measuring relays and protection equipment.Part 151:Functional requirements for over/under current protection GB/T 14598.16-2002 Electrical relays--Part 25: Electromagnetic emission tests for measuring relays and protection equipment GB/T 14598.17-2005 Electrical relay-Part 22-6:Electrical disturbance tests for measuring relays and protection equipment-Immunity to conducted disturbances induced by radio frequency fields GB/T 14598.18-2012 Measuring relays and protection equipment.Part 22-5:Electrical disturbance tests.Surge immunity test GB/T 14598.181-2021 Measuring relays and protection equipment—Part 181:Functional requirements for frequency protection GB/T 14598.1871-2024 Measuring relays and protective devices Part 187-1: Functional requirements for differential protection Ratio braking differential protection and differential quick-break protection of motors, generators and transformers GB/T 14598.19-2007 Electrical relays Part 22-7: Electrical disturbance tests for measuring relays and protection equipment Power frequency immunity test GB/T 14598.2-2011 Measuring relays and protection equipment. Part 1:Common requirements GB/T 14598.20-2007 Electrical relays Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment GB/T 14598.23-2017 Electrical relays—Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment—Section 3: Seismic tests GB/T 14598.24-2017 Measuring relays and protection equipment—Part 24: Common format for transient data exchange (COMTRADE) for power systems GB/T 14598.26-2015 Measuring relays and protection equipment.Part 26: Electromagnetic compatibility requirements GB/T 14598.27-2017/XG1-2019 Measuring Relays and Protective Devices Part 27: Product Safety Requirements "No. 1 Amendment" GB/T 14598.27-2017/XG1-2019 Measuring Relays and Protective Devices Part 27: Product Safety Requirements "No. 1 Amendment" GB/T 14598.3-2006 Electrical relays.Part 5:Insulation coordination for measuring relays and protection equipment.Requirements and tests GB/T 14598.300-2017 General specification for transformer protection equipment GB/T 14598.301-2020 Technical requirements for power system continuous recorder GB/T 14598.302-2016 Specification for arc flash protection equipment GB/T 14598.303-2011 General specification for digital motor combined protection equipment GB/T 14598.4-1993 Electrical relays. Part 14: Endurance test for electrical relay contacts. Preferred values for contact loads GB/T 14598.5-1993 Electrical relays. Part 15: Endurance tests for electrical relay contacts. Specification for the characteristics of test equipment GB/T 14598.6-1993 Electrical relays. Part 18: Dimensions for general purpose all-or-nothing relays GB/T 14598.7-1995 Electrical relays. Part 3: Single input energizing quantity measuring relays with dependent or independent time GB/T 14598.8-2008 Electrical relays.Part 20:Protection systems GB/T 14598.9-2010 Measuring relays and protection equipment.Part 22-3:Electrical disturbance tests.Radiated electromagnetic field immunity



Copyright ©2024 All Rights Reserved