ASTM B618/B618M-07
Standard Specification for Aluminum-Alloy Investment Castings
- Standard No.
- ASTM B618/B618M-07
- Release Date
- 2007
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM B618/B618M-08
- Latest
- ASTM B618/B618M-18e1
- Scope
1.1 This specification covers aluminum-alloy investment castings designated as shown in Table 1.
1.2 This specification is not intended for aluminum-alloy investment castings used in aerospace applications.
1.3 Alloy and temper designations are in accordance with ANSI H35.1/H35.1 (M). The equivalent Unified Numbering System alloy designations are in accordance with Practice E 527.
1.4 Unless the order specifies the "M" specification designation, the material shall be furnished to the inch-pound units.
1.5 For acceptance criteria for inclusion of new aluminum and aluminum alloys and their properties in this specification, see Annex A1 and Annex A2.
1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM B618/B618M-07 Referenced Document
- ASTM B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
- ASTM B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
- ASTM B557 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- ASTM B557M Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
- ASTM B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
- ASTM B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
- ASTM D3951 Standard Practice for Commercial Packaging
- ASTM E1251 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge
- ASTM E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
- ASTM E165 Standard Test Method for Liquid Penetrant Examination
- ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
- ASTM E527 Standard Practice for Numbering Metals and Alloys (UNS)
- ASTM E607 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique, Nitrogen Atmosphere
- ASTM E716 Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
- ASTM E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
- ASTM E94 Standard Guide for Radiographic Examination
- IEEE/ASTM SI 10 American National Standard for Metric Practice
- SAE AMS2771 HEAT TREATMENT OF ALUMINUM ALLOY CASTINGS
ASTM B618/B618M-07 history
- 2018 ASTM B618/B618M-18e1 Standard Specification for Aluminum-Alloy Investment Castings
- 2018 ASTM B618/B618M-18 Standard Specification for Aluminum-Alloy Investment Castings
- 2014 ASTM B618/B618M-14 Standard Specification for Aluminum-Alloy Investment Castings
- 2011 ASTM B618/B618M-11a Standard Specification for Aluminum-Alloy Investment Castings
- 2011 ASTM B618/B618M-11 Standard Specification for Aluminum-Alloy Investment Castings
- 2010 ASTM B618/B618M-10 Standard Specification for Aluminum-Alloy Investment Castings
- 2008 ASTM B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
- 2007 ASTM B618/B618M-07 Standard Specification for Aluminum-Alloy Investment Castings
- 2006 ASTM B618-06 Standard Specification for Aluminum-Alloy Investment Castings
- 2003 ASTM B618-03 Standard Specification for Aluminum-Alloy Investment Castings
- 2002 ASTM B618-02e1 Standard Specification for Aluminum-Alloy Investment Castings
- 2001 ASTM B618-02 Standard Specification for Aluminum-Alloy Investment Castings
- 2001 ASTM B618-01 Standard Specification for Aluminum-Alloy Investment Castings
- 1999 ASTM B618-99 Standard Specification for Aluminum-Alloy Investment Castings
