ASTM D5293-02
Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35176;C Using the Cold-Cranking Simulator

Standard No.
ASTM D5293-02
Release Date
2002
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D5293-04
Latest
ASTM D5293-20
Scope

1.1 This test method covers the laboratory determination of apparent viscosity of engine oils by cold cranking simulator (CCS) at temperatures between -5 and -35176;C at shear stresses of approximately 50 000 to 100 000 Pa and shear rates of approximately 10 5 to 10 4 s-1 and viscosities of approximately 500 to 25 000 mPa183;s. The range of an instrument is dependent on the instrument model and software version installed. These results are related to engine-cranking characteristics of engine oils.

1.2 A special procedure is provided in Annex A1 for highly viscoelastic oils.

1.3 Procedures are provided for both manual and automated determination of the apparent viscosity of engine oils using the cold-cranking simulator.

1.4 A special manual procedure is provided in Annex A1 for highly viscoelastic oils.

1.5 The values stated in SI units are to be regarded as the standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 7.1, 7.2, 7.3, and Section 8.

ASTM D5293-02 history

  • 2020 ASTM D5293-20 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator
  • 2017 ASTM D5293-17a Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013;10&x2009;&xb0;C and &x2013;35&x2009;&xb0;C Using Cold-Cranking Simulator
  • 2017 ASTM D5293-17e1 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013;10&x2009;&xb0;C and &x2013;35&x2009;&xb0;C Using Cold-Cranking Simulator
  • 2017 ASTM D5293-17 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013;10&x2009;&xb0;C and &x2013;35&x2009;&xb0;C Using Cold-Cranking Simulator
  • 2015 ASTM D5293-15 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between &x2013;10&x2009;&xb0;C and &x2013;35&x2009;&xb0;C Using Cold-Cranking Simulator
  • 2014 ASTM D5293-14 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between ndash;5deg;C and ndash;35deg;C Using Cold-Cranking Simulator
  • 2010 ASTM D5293-10e1 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between x2013;5 and x2013;35x00B0;C Using Cold-Cranking Simulator
  • 2010 ASTM D5293-10 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35&176;C Using the Cold-Cranking Simulator
  • 2009 ASTM D5293-09 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35176;C Using the Cold-Cranking Simulator
  • 2008 ASTM D5293-08e1 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35176;C Using the Cold-Cranking Simulator
  • 2008 ASTM D5293-08 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35176;C Using the Cold-Cranking Simulator
  • 2004 ASTM D5293-04 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35176;C Using the Cold-Cranking Simulator
  • 2002 ASTM D5293-02 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35176;C Using the Cold-Cranking Simulator
  • 1999 ASTM D5293-99ae1 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35oC Using the Cold-Cranking Simulator



Copyright ©2024 All Rights Reserved