ISO 6807:2003 PDF

Scope: This International Standard specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C. This International Standard applies to hoses which are suitable for use at ambient temperatures between − 20 °C and + 52 °C, unless changed by a supplementary requirement on request of the purchaser, and are resistant to ageing and tropical conditions. This International Standard does not apply to hoses which are intended for use with gases.

ISO 6807:2003 Referenced Document

ISO 10422 Petroleum and natural gas-industries; threading, gauging, and thread inspection of casing, tubing and line pipe threads; specification
ISO 1402:1994 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 1431-1 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing*， 2022-06-23 Update
ISO 1746:1998 Rubber or plastics hoses and tubing - Bending tests
ISO 1817 Rubber, vulcanized or thermoplastic*， 2024-02-01 Update
ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests*， 2023-03-09 Update
ISO 2977 Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point
ISO 37 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties*， 2017-11-01 Update
ISO 4649:2002 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 4671 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies*， 2022-03-21 Update
ISO 7233:1991 Rubber and plastics hoses and hose assemblies; determination of suction resistance
ISO 8330 Rubber and plastics hoses and hose assemblies — Vocabulary*， 2022-03-28 Update
ISO 8331 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance*， 2016-11-01 Update

2003 ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification
1984 ISO 6807:1984 Rubber hoses and hose assemblies for rotary drilling and vibration applications; Specification