GB/T 21432-2008
Graphite pressure vessels (English Version)
- Standard No.
- GB/T 21432-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2021-07
- Replace By
- GB/T 21432-2021
- Latest
- GB/T 21432-2021
- Scope
- This standard specifies the requirements for the design, material, manufacture, inspection and acceptance, storage and transportation of graphite pressure vessels (hereinafter referred to as vessels). This standard is applicable to the storage of gas, liquefied gas and liquids whose maximum working temperature is higher than or equal to the standard boiling point, the working pressure is greater than or equal to 0.1MPa, less than or equal to 2.4MPa, and the product of pressure and volume is greater than or equal to 2.5MPa·L Various graphite pressure vessels, the applicable temperature is -60℃～400℃. The metal pressure components in the container shall comply with the relevant provisions of GB 150 and GB 151; the non-pressure steel parts shall comply with the relevant provisions of JB/T 4735. This standard does not apply to the following graphite containers: a) Graphite containers heated directly by flame; b) Graphite containers in nuclear energy installations; c) Cast graphite; d) Graphite brick lining equipment whose main stress is borne by the metal shell.
GB/T 21432-2008 Referenced Document
- GB 150 Pressure Vessels (Bound Edition)*， 2024-04-18 Update
- GB 151 Tubular heat exchangers
- GB/T 13465.1 Test method of impermeable graphite materials.Part 1:General of test method for mechanical properties*， 2014-09-03 Update
- GB/T 13465.2 Test method of impermeable graphite materials.Part 2:Flexure strength*， 2014-09-03 Update
- GB/T 13465.3 Test method of impermeable graphite materials.Part 3:Compress strength*， 2014-09-03 Update
- GB/T 1431 The test method for compressive strength of carbon materials*， 2019-06-04 Update
- GB/T 1804 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 6155 Carbon materials-Determination of the true density or porosity*， 2008-12-06 Update
- GB/T 8721 The test method for tensile strength of carbon materials*， 2019-06-04 Update
- GB/T 9439 Gray cast iron parts*， 2023-09-07 Update
- HG/T 2059 Technical regulations for imperious graphite tube*， 2014-05-12 Update
- HG/T 2378 Test method of the adhesion tensile strength of graphite adhesion agent
- HG/T 2379 Test method of the adhesion shear strength of graphite adhesion agent
- HG/T 2380 Test method for shrinkage of graphite phenolic adhesive
- HG/T 2381 Water pressure burst test method of impermeable graphite tube
- HG/T 2642 Test method for tensile strength of impermeable graphite materials
- JB/T 4711 Coating and packing for pressure vessels transport
- JB/T 4735 Steel Welded Atmospheric Pressure Vessel
- YB/T 119 Carbon materials.Determination method of the bulk density
- YB/T 2818 Graphite block
GB/T 21432-2008 history
- 2021 GB/T 21432-2021 Graphite pressure vessels
- 2008 GB/T 21432-2008 Graphite pressure vessels
