On the basis of GB/T 21413.1, this part specifies the general rules for all electrotechnical devices installed in the rolling stock main circuit, auxiliary circuit, control and indicating circuit. The purpose of this part is to make the general conditions stipulated in GB/T 21413.1 applicable to all electrical devices on the rolling stock, so as to ensure the consistency of the technical requirements and tests of the corresponding devices. Electrical devices mainly refer to switchgear and control equipment, including relays, switches, resistors, fuses, etc., but excluding their control parts. This part gives: a) characteristics of the device; b) conditions of use that the device should follow; c) test items and test methods used to verify that the device meets the characteristics under the conditions of use; d) information that should be marked or given on the electrical appliance . This section does not apply to industrial appliances, which should comply with their respective product standards. In order to ensure that these electrical appliances work normally on rolling stock, this section only specifies the special requirements for these electrical appliances under the conditions of railway application. For this reason, there should be special documents to explain the additional requirements that industrial electrical appliances should meet, such as: - Which kind of working conditions are applicable (such as control voltage, environmental conditions, etc.); Installation and use; - carry out additional tests to verify that these devices can meet the conditions of use of rolling stock.
GB/T 21413.2-2008 Referenced Document
GB 4208 Degrees of protection provided by enclosure(IP code)*, 2008-03-25 Update
GB/T 21413.1-2008 Railway applications.Electric equipment for rolling stock.Part 1:General service conditions and general rules
GB/T 21413.3-2008 Railway applications.Electric equipment for rolling stock.Part 3:Electrotechnical components.Rules for d.c. circuit-breakers
GB/T 21413.4-2008 Railway applications.Electric equipment for rolling stock.Part 4:Electrotechnical components.Rules for AC circuit-breakers
GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests B: Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products. Test Ca:Damp heat,steady state
GB/T 2900.18-1992 Electrotechnical terminology--Low voltage apparatus
IEC 60571:1998 Electronic equipment used on rail vehicles
GB/T 21413.2-2008 history
2021GB/T 21413.2-2021 Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules
2008GB/T 21413.2-2008 Railway applications.Electric equipment for rolling stock.Part 2:Electrotechnical components.General rules
GB/T 21413.2-2008 Railway applications.Electric equipment for rolling stock.Part 2:Electrotechnical components.General rules has been changed from TB/T 1333.2-2002 Railway applications-Electric equipment for rolling stock-Part 2:Electrotechnical components-General rules.