This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of road sweepers (hereinafter referred to as sweepers). This standard applies to pure sweeping, pure suction and suction sweepers using stereotyped car chassis.
JB/T 7303-2007 Referenced Document
GB 12676 Technical requirements and testing methods for commercial vehicle and trailer braking systems*, 2014-10-10 Update
GB 1495 Limits and measurement methods for noise emitted by accelerating motor vethicles
GB 15741 The license plates(crackets)and its position on motor vehicles and trailer
GB 1589 Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles*, 2016-07-26 Update
GB 18285 Limits and measurement methods for emissions from gasoline vehicles under two-speed idle conditions and simple driving mode conditions*, 2018-09-27 Update
GB 3847 Limits and measurement methods for emissions from diesel vehicles under free acceleration and lugdown cycle*, 2018-09-27 Update
GB 4785 Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers*, 2019-12-17 Update
GB 7258 Amendment No. 2 to Technical Conditions for Motor Vehicle Operation Safety
GB/T 12534-1990 Motor vehicles--General rules of road test method
GB/T 12536 Coastdown test method of motor vehicles*, 2017-10-14 Update
GB/T 12537 Motor vehicles--Towing performance--Test method
GB/T 12538 Determination of the position of the center of mass of a road vehicle*, 2023-11-27 Update
GB/T 12539 Motor vehicles steep hill climbing test method*, 2018-05-14 Update
GB/T 12540 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
GB/T 12543 Acceleration performance test method for motor vehicles*, 2009-03-23 Update
GB/T 12544 Measurement of maximum speed of motor vehicles*, 2012-12-31 Update
GB/T 12545.2 Commercial vehicle-Fuel consumption test method
GB/T 12547 Minimum stable speed test method for motor vehicles*, 2009-03-23 Update