SAE AMS6476C-2006
Steel, Bars, Forgings, and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) UNS K19526

Standard No.

SAE AMS6476C-2006

Release Date

2006

Published By

Society of Automotive Engineers (SAE)

Status

Withdraw

Replace By

SAE AMS6476D-2011

Latest

SAE AMS6476F-2021

Scope

This specification covers a low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. These products have been used typically for bearing components requiring a through-hardening steel usually with hardness of approximately 60 HRC and section thickness under 0.50 inch (12.7 mm), but usage is not limited to such applications.

SAE AMS6476C-2006 history

• 2021 SAE AMS6476F-2021 Steel, Bars, Forgings, Mechanical Tubing and Forging Stock 0.50Cr - 0.12Mo (0.89 - 1.01C)
• 2016 SAE AMS6476E-2016 Steel@ Bars@ Forgings@ and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) (UNS K19526)
• 2011 SAE AMS6476D-2011 Steel, Bars, Forgings, and Tubing 0.50Cr 0.12Mo (0.89 1.01C)
• 2006 SAE AMS6476C-2006 Steel, Bars, Forgings, and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) UNS K19526
• 2001 SAE AMS6476B-2001 Steel, Bars, Forgings, and Tubing 0.50Cr 0.12Mo (0.89 1.01C)
• 1995 SAE AMS6476A-1995 Steel@ Bars@ Forgings@ and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) (UNS K19526)
• 1988 SAE AMS6476-1988 STEEL BARS@ FORGINGS@ AND TUBING 0.50Cr - 0.12Mo (0.89 - 1.01C) For Bearing Applications (UNS K19526)