SAE AMS6476E-2016
Steel@ Bars@ Forgings@ and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) (UNS K19526)

Standard No.
SAE AMS6476E-2016
Release Date
2016
Published By
SAE - SAE International
Status
Replace By
SAE AMS6476F-2021
Latest
SAE AMS6476F-2021
Scope
Form This specification covers a low-alloy steel in the form of bars@ forgings@ mechanical tubing@ and forging or tubing stock. Application These products have been used typically for bearing components requiring a through-hardening steel usually with hardness of approximately 60 HRC and section thickness under 0.50 inch (12.7 mm)@ but usage is not limited to such applications.

SAE AMS6476E-2016 history

  • 2021 SAE AMS6476F-2021 Steel, Bars, Forgings, Mechanical Tubing and Forging Stock 0.50Cr - 0.12Mo (0.89 - 1.01C)
  • 2016 SAE AMS6476E-2016 Steel@ Bars@ Forgings@ and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) (UNS K19526)
  • 2011 SAE AMS6476D-2011 Steel, Bars, Forgings, and Tubing 0.50Cr 0.12Mo (0.89 1.01C)
  • 2006 SAE AMS6476C-2006 Steel, Bars, Forgings, and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) UNS K19526
  • 2001 SAE AMS6476B-2001 Steel, Bars, Forgings, and Tubing 0.50Cr 0.12Mo (0.89 1.01C)
  • 1995 SAE AMS6476A-1995 Steel@ Bars@ Forgings@ and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) (UNS K19526)
  • 1988 SAE AMS6476-1988 STEEL BARS@ FORGINGS@ AND TUBING 0.50Cr - 0.12Mo (0.89 - 1.01C) For Bearing Applications (UNS K19526)



Copyright ©2024 All Rights Reserved