ISO 11003-2:2001
Adhesives - Determination of shear behaviour of structural adhesives - Part 2: Tensile test method using thick adherends
- Standard No.
- ISO 11003-2:2001
- Release Date
- 2001
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 11003-2:2019
- Latest
- ISO 11003-2:2019
- Scope
- This part of ISO 11003 specifies a test method for determining the shear behaviour of an adhesive in a single lap joint bonded assembly when subjected to a tensile force. The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, in order to obtain the most uniform distribution of shear stresses possible and to minimize other stress states which initiate failure. This test method may be used to determine: — the shear-stress against shear-strain curve to failure of the adhesive; — the shear modulus of the adhesive; — other adhesive properties that can be derived from the stress/strain curve such as secant shear modulus and maximum shear stress; — the effect of temperature, environment, test speed, etc., on these properties.
ISO 11003-2:2001 history
- 2019 ISO 11003-2:2019 Adhesives — Determination of shear behaviour of structural bonds — Part 2: Thick-adherend tensile-test method
- 2001 ISO 11003-2:2001 Adhesives - Determination of shear behaviour of structural adhesives - Part 2: Tensile test method using thick adherends
- 1993 ISO 11003-2:1993 Adhesives; determination of shear behaviour of structurel bonds; part 2: thick-adherend tensile-test method
