ISO 11003-2:2019 PDF

Scope: This document specifies a test method for determining the shear behaviour of an adhesive in a single lap joint bonded assembly when subjected to a tensile force. The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, in order to obtain the most uniform distribution of shear stresses possible and to minimize other stress states which initiate failure. This test method may be used to determine: — the shear-stress against shear-strain curve to failure of the adhesive; — the shear modulus of the adhesive; — other adhesive properties that can be derived from the stress/strain curve such as secant shear modulus and maximum shear stress; — the effect of temperature, environment, test speed, etc., on these properties. This document does not apply in case of adhesion failure.

ISO 11003-2:2019 Referenced Document

ISO 10365 Adhesives — Designation of main failure patterns*， 2022-01-21 Update
ISO 14737 Carbon and low alloy cast steels for general applications*， 2021-06-30 Update
ISO 17212 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
ISO 291 Plastics - Standard atmospheres for conditioning and testing
ISO 4995 Hot-rolled steel sheet of structural quality
ISO 683-3 Heat-treatable steels, alloy steels and free-cutting steels*， 2024-01-01 Update

2019 ISO 11003-2:2019 Adhesives — Determination of shear behaviour of structural bonds — Part 2: Thick-adherend tensile-test method
2001 ISO 11003-2:2001 Adhesives - Determination of shear behaviour of structural adhesives - Part 2: Tensile test method using thick adherends
1993 ISO 11003-2:1993 Adhesives; determination of shear behaviour of structurel bonds; part 2: thick-adherend tensile-test method