GB 17464-1998
Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors (English Version)
- Standard No.
- GB 17464-1998
- Language
- Chinese, Available in English version
- Release Date
- 1998
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2013-05
- Replace By
- GB 17464-2012
- GB/T 17464-2012
- Latest
- GB 17464-2012
- GB/T 17464-2012
- Scope
- This standard is applicable to threaded and non-threaded clamping parts as independent units or as integral parts of equipment, whose rated AC voltage does not exceed 1000V, frequency does not exceed 1000Hz and rated DC voltage does not exceed 1500V. Used to connect hard (single core or stranded) and/or soft copper wires with a cross-sectional area of 0.5mm2～15mm2 (or corresponding AWG wire gauge size) (according to IEC288 requirements) . This standard applies to clamps intended primarily for the connection of untreated conductors. Note: This standard does not apply to: a) clamping parts for crimping or soldering connections; b) clamping parts for digital or signal circuits; Clamping elements such as type connectors; the requirements for these angled fasteners are under consideration.
GB 17464-1998 history
- 2012 GB 17464-2012 Connecting devices.Electrical copper conductors.Safety requirements for screw-type and screwless-type clamping units.General requirements and particular requirements for clamping units for conductors from 0.2mm² up to 35mm²（included）
- 1998 GB 17464-1998 Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors
