GB/T 10827.2-2021 (English Version) PDF

Scope: This document specifies the safety requirements and verification methods for self-propelled industrial telescopic forklifts and telescopic container handlers/reachstackers (hereinafter referred to as "vehicles") as defined in ISO5053 1. Such vehicles are usually equipped with forks or integrated load handling devices (such as container spreaders, etc.) in normal industrial use. This document does not apply to: --- off-road telescopic forklift; --- off-road telescopic container handler; --- machinery designed mainly for earthmoving operations (such as loaders and bulldozers), even if their Buckets and bulldozing blades are replaced by forks; --- machinery that can swing the load freely in all directions. In this document, forks and integral attachments are considered part of the vehicle, while detachable attachments mounted on the carrier or forks are not. However, this document also gives the requirements for these attachments. This document covers all major hazards, hazardous states or hazardous events listed in Appendix B, except for the following situations, when the machinery is used under the manufacturer's intended use and misuse under foreseeable conditions. This document does not cover the dangers that may occur in the following situations: --- During the manufacturing process; --- When used on roads; --- When operating in potentially explosive atmospheres; --- When lifting personnel.

GB/T 10827.2-2021 Referenced Document

GB/T 15706-2012 Safety of machinery.General principles for design.Risk assessment and risk reduction
GB/T 8420-2011 Earth-moving machinery.Physical dimensions of operators and minimum operator space envelope
ISO 10263-3 Earth-moving machinery - Operator enclosure environment - Part 3: Pressurization test method
ISO 2328 Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions
ISO 2330 Fork-lift trucks - Fork arms - Technical characteristics and testing
ISO 2867 Earth-moving machinery - Access systems
ISO 3287 Powered industrial trucks - Symbols for operator controls and other displays
ISO 5053-1 Industrial trucks — Vocabulary — Part 1: Types of industrial trucks
ISO 5353 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point
ISO 6055:2004 Industrial trucks - Overhead guards - Specification and testing
ISO 6292 Powered industrial trucks and tractors — Brake performance and component strength
ISO 7000 Graphical symbols for use on equipment — Index and synopsis

2021 GB/T 10827.2-2021 Industrial trucks—Safety requirements and verification—Part 2: Self-propelled variable-reach trucks