ASTM F3351-19e1
Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height

Standard No.

ASTM F3351-19e1

Release Date

2019

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM F3351-19e1

Scope

1.1 This test method covers all playground surfaces to be tested in a laboratory setting at a specific drop height established by the manufacturer of the playground surface to determine shock absorption properties at the specified height above the surface and to evaluate surfaces based on their Gmax and HIC values described in Specification F1292. NOTE 1—This test method is not intended to replace Specification F1292 for critical fall height (CFH) testing but to provide more information to either the manufacturer of the surface or the owner/operator purchasing the surface. NOTE 2—This test method informs the owner/operator of the impact attenuating performance of the surfacing system at the specified height used in the test. 1.2 This test method is specific to surfacing used in conjunction with playground equipment, such as that described in Specifications F1148, F1487, F1918, and CSA Z614. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM F3351-19e1 Referenced Document

• ASTM F1148 Standard Consumer Safety Performance Specification for Home Playground Equipment*， 2022-03-01 Update
• ASTM F1292 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment
• ASTM F1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
• ASTM F1918 Standard Safety Performance Specification for Soft Contained Play Equipment
• ASTM F3313 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field*， 2020-10-01 Update
• ASTM F355 Standard Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
• CSA Z614 

ASTM F3351-19e1 history

• 2019 ASTM F3351-19e1 Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height
• 2019 ASTM F3351-19 Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height