ASTM F3313-20
Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field

Standard No.

ASTM F3313-20

Release Date

2020

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM F3313-20

Scope

1.1 This test method provides a means of determining impact attenuation performance of a playground using a test method that simulates the impact of a child’s head with the playground surfaces. 1.2 This test method is specific to surfacing materials used in conjunction with playground equipment, such as that described in Specifications F1148, F1487, F1918, CSA Z614 (Canada), and SS457 (Singapore). 1.3 This test method establishes procedures for determining the impact attenuation value of playground surfaces as tested in the field and for comparison with the test performed under laboratory conditions in Specification F1292 and contract and warranty requirements. This test method does not establish the critical fall height for an installed playground surface. 1.4 The field test required by this test method addresses the performance of playground surfaces as they are found in the field during a time when play by children 2-12 is anticipated. 1 This test method is under the jurisdiction of ASTM Committee F08 on Sports Equipment, Playing Surfaces, and Facilities and is the direct responsibility of Subcommittee F08.63 on Playground Surfacing Systems. Current edition approved Oct. 1, 2020. Published November 2020. Originally approved in 2018. Last previous edition approved in 2019 as F3313 – 19. DOI: 10.1520/F3313-20. 2 U.S. CPSC Special Study. Injuries and Deaths Associated with Children’s Playground Equipment, April 2001. US Consumer Product Safety Commission, Washington DC. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.5 The impact attenuation test method and test methods established in this test method are specific to the risk of head injury. There is evidence that lowering impact attenuation values can reduce the risk of other kinds of serious injury (for example, long bone fractures). 1.6 This test method relates only to the impact attenuation properties of playground surfacing materials and does not address other factors that contribute to fall-related injuries. While it is believed that conformance with the requirements of this test method will reduce the risk of severe injury and death from falls, adherence to this test method will not prevent all injuries and deaths. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM F3313-20 Referenced Document

• ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
• ASTM F1148 Standard Consumer Safety Performance Specification for Home Playground Equipment*， 2022-03-01 Update
• ASTM F1292 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment
• ASTM F1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
• ASTM F1918 Standard Safety Performance Specification for Soft Contained Play Equipment
• ASTM F355 Standard Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
• CSA Z614 

ASTM F3313-20 history

• 2020 ASTM F3313-20 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
• 2019 ASTM F3313-19 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
• 2018 ASTM F3313-18 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field