GB/T 39560.5-2021 Determination of certain substances in electrical and electronic products—Part 5: Cadmium,lead and chromium in polymers and electronics and cadmium and lead in metals by AAS,AFS,ICP-OES and ICP-MS (English Version)
This part of GB/T 39560 describes the methods for the determination of lead, cadmium and chromium in polymers, metals and electronic parts by AAS, AFS, ICP-OES and ICP-MS. This part specifies the determination of cadmium (Cd), lead (Pb) and chromium (Cr) content in electrical and electronic products. It covers three types of substrates: polymer/polymer components, metals and alloys, and electronics. The sample in this section refers to the object of processing and testing. Samples and how they are obtained are determined by the institution performing the testing. See IEC 62321 2 for further guidance on how to obtain representative samples for the detection of restricted substances in electronic products. sample selection and/or
GB/T 39560.5-2021 Referenced Document
IEC 62321-1 Determination of certain substances in electrotechnical products .Part 1: Introduction and overview
IEC 62321-2 Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation
IEC 62321-3-1 Determination of certain substances in electrotechnical products - Part 3-1: Screening test methods - Screening of electrotechnical products for lead, mercury, cadmium, total chromium and total bromine using X-ray fluorescence spectrometry
ISO 3696 Water for analytical laboratory use; Specification and test methods
ISO 5961 Water quality; determination of cadmium by atomic absorption spectrometry
GB/T 39560.5-2021 history
2021GB/T 39560.5-2021 Determination of certain substances in electrical and electronic products—Part 5: Cadmium,lead and chromium in polymers and electronics and cadmium and lead in metals by AAS,AFS,ICP-OES and ICP-MS