ASTM D8149-17
Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

Standard No.

ASTM D8149-17

Release Date

2017

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D8149-20

Latest

ASTM D8149-20

Scope

1.1 This practice covers the information on calibration, quality control, and operational guidance for anionic measurements using ion chromatography (IC). 1.2 IC Related Standards—Chemically or electrolytically regenerated suppressed ion chromatography standards for aqueous matrices include Test Methods D2988, D4327, D5085, D5542, D5827, D5987, D5996, D6581, D7319, D7328, D7359, D7773, D7994, and D8150; IC instrumentation requirements are described in Practices E1151, and E1511. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D8149-17 Referenced Document

• ASTM D1193 Standard Specification for Reagent Water
• ASTM D2988 Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures*， 2020-04-01 Update
• ASTM D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
• ASTM D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
• ASTM D4327 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
• ASTM D5085 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
• ASTM D5542 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
• ASTM D5827 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
• ASTM D5987 Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
• ASTM D5996 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
• ASTM D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance*， 2023-07-01 Update
• ASTM D6581 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography*， 2018-05-01 Update
• ASTM D6751 Standard Specification for Biodiesel Fuel Blendstock (B100) for Middle Distillate Fuels*， 2023-04-01 Update
• ASTM D6792 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories*， 2023-11-01 Update
• ASTM D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration*， 2019-02-14 Update
• ASTM D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography*， 2022-10-01 Update
• ASTM D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection*， 2023-03-01 Update
• ASTM D7359 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion*， 2023-04-01 Update
• ASTM D7591 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
• ASTM D7773 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography*， 2019-10-01 Update
• ASTM D7994 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatograp
• ASTM D8150 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography*， 2022-10-01 Update
• ASTM D86 Standard Test Method for Distillation of Petroleum Products
• ASTM D975 Standard Specification for Diesel Fuel Oils
• ASTM E1151 Standard Practice for Ion Chromatography Terms and Relationships*， 2019-12-01 Update
• ASTM E1511 Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography

ASTM D8149-17 history

• 2020 ASTM D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
• 2017 ASTM D8149-17 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants