ASTM D204-02(2021)
Standard Test Methods for Sewing Threads
- Standard No.
- ASTM D204-02(2021)
- Release Date
- 2021
- Published By
- American Society for Testing and Materials (ASTM)
- Latest
- ASTM D204-02(2021)
- Scope
- 1.1 These test methods can be used to evaluate sewing threads of any fiber. 1.1.1 The test methods in this standard are intended to evaluate only sewing thread taken from thread holders. 1.2 These test methods only provide for the measurement of sewing thread physical properties. These test methods do not address any other properties that may be important for the satisfactory performance of sewing threads under particular end use conditions. 1.3 These test methods can be used to measure the following properties: Sections Colorfastness to Drycleaning 73 – 83 Colorfastness to Laundering 62 – 72 Colorfastness to Water Migration 84 – 94 Diameter 43 – 50 Length per Thread Holder 34 – 42 Shrinkage, Single Strand 51 – 61 Dry Heat 58.1 Boiling Water 58.2 Strength and Elongation 15 – 21 Single Strand—Conditioned 19.1.1 Single Strand—Wet 19.1.2 Loop Strength 19.2 Knot Strength 19.3 Twist 22 – 27 Twist Balance 28 – 33 Yarn Number 7 – 14 NOTE 1—For methods covering tests on prepared seams, refer to Test Methods D1683/D1683M and D3940. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D204-02(2021) Referenced Document
- ASTM D123 Standard Terminology Relating to Textiles*， 2023-09-14 Update
- ASTM D1422/D1422M Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
- ASTM D1423/D1423M Standard Test Method for Twist in Yarns by Direct-Counting*， 2022-02-01 Update
- ASTM D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Fabrics*， 2022-04-01 Update
- ASTM D1776/D1776M Standard Practice for Conditioning and Testing Textiles
- ASTM D1777 Standard Test Method for Thickness of Textile Materials
- ASTM D1907/D1907M Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
- ASTM D2256/D2256M Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
- ASTM D2258/D2258M Standard Practice for Sampling Yarn for Testing*， 2022-02-01 Update
- ASTM D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
- ASTM D3693 Standard Specification for Labeled Length per Holder of Sewing Thread
- ASTM D3823 Standard Practice for Determining Ticket Numbers for Sewing Threads
- ASTM D3940
- ASTM D4848 Standard Terminology Related to Force, Deformation and Related Properties of Textiles
- ASTM D4849 Standard Terminology Related to Yarns and Fibers
ASTM D204-02(2021) history
- 2021 ASTM D204-02(2021) Standard Test Methods for Sewing Threads
- 2002 ASTM D204-02(2016) Standard Test Methods for Sewing Threads
- 2002 ASTM D204-02(2010)e1 Standard Test Methods for Sewing Threads
- 2002 ASTM D204-02(2010) Standard Test Methods for Sewing Threads
- 2002 ASTM D204-02 Standard Test Methods for Sewing Threads
- 1997 ASTM D204-97 Standard Test Methods for Sewing Threads
