ASTM C1876-19
Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- Standard No.
- ASTM C1876-19
- Release Date
- 2019
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM C1876-23
- Latest
- ASTM C1876-24
- Scope
- 1.1 This test method covers the determination of the bulk electrical resistivity or conductivity of molded specimens or cored sections of hardened concrete after immersion in water saturated with a simulated pore solution in order to provide a rapid indication of its resistance to the penetration of fluids and dissolved aggressive ions. 1.2 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. If required results obtained from another standard are not reported in the same system of units as used by this standard, it is permitted to convert those results using the conversion factors found in the SI Quick Reference Guide.2 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.)3 For specific warning statement see 8.1.2. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C1876-19 Referenced Document
- ASTM C1202 Standard Test Method for Electrical Indication of Concrete''s Ability to Resist Chloride Ion Penetration
- ASTM C125 Standard Terminology Relating to Concrete and Concrete Aggregates*， 2021-10-01 Update
- ASTM C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion*， 2022-10-01 Update
- ASTM C1760 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete*， 2024-04-21 Update
- ASTM C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory*， 2019-12-01 Update
- ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field*， 2024-04-01 Update
- ASTM C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C1876-19 history
- 2024 ASTM C1876-24 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- 2023 ASTM C1876-23 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- 2019 ASTM C1876-19 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
