ASTM C192/C192M-19
Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

Standard No.

ASTM C192/C192M-19

Release Date

2019

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM C192/C192M-19

Scope

1.1 This practice covers procedures for making and curing test specimens of concrete in the laboratory under accurate control of materials and test conditions using concrete that can be consolidated by rodding or vibration as described herein. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to exposed skin and tissue upon prolonged exposure.2 ) 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C192/C192M-19 Referenced Document

• ASTM C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete
• ASTM C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation*， 2024-01-01 Update
• ASTM C125 Standard Terminology Relating to Concrete and Concrete Aggregates*， 2021-10-01 Update
• ASTM C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
• ASTM C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
• ASTM C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete*， 2023-08-01 Update
• ASTM C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete*， 2020-06-01 Update
• ASTM C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete*， 2021-05-15 Update
• ASTM C172/C172M Standard Practice for Sampling Freshly Mixed Concrete*， 2024-04-22 Update
• ASTM C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method*， 2024-01-01 Update
• ASTM C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete*， 2023-10-01 Update
• ASTM C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method*， 2024-01-01 Update
• ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field*， 2024-04-01 Update
• ASTM C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete
• ASTM C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
• ASTM C470/C470M Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
• ASTM C494/C494M Standard Specification for Chemical Admixtures for Concrete
• ASTM C511 Standard Specification for Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
• ASTM C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
• ASTM C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens*， 2023-10-20 Update
• ASTM C70 Standard Test Method for Surface Moisture in Fine Aggregate

ASTM C192/C192M-19 history

• 2019 ASTM C192/C192M-19 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2018 ASTM C192/C192M-18 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2016 ASTM C192/C192M-16a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2016 ASTM C192/C192M-16 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2015 ASTM C192/C192M-15 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2014 ASTM C192/C192M-14 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2013 ASTM C192/C192M-13a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2013 ASTM C192/C192M-13 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2012 ASTM C192/C192M-12a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2012 ASTM C192/C192M-12 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2007 ASTM C192/C192M-07 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2006 ASTM C192/C192M-06 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2005 ASTM C192/C192M-05 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2002 ASTM C192/C192M-02 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
• 2000 ASTM C192/C192M-00 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory