ASTM D3359-17
Standard Test Methods for Rating Adhesion by Tape Test

Standard No.
ASTM D3359-17
Release Date
2017
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D3359-22
Latest
ASTM D3359-23
Scope
1.1 These test methods cover procedures for assessing the adhesion of relatively ductile coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film. 1.2 Test Method A is primarily intended for use in the field while Test Method B is more suitable for use in laboratory or shop environments. Also, Test Method B is not considered suitable for films thicker than 125µm (5 mils) unless wider spaced cuts are employed and there is an explicit agreement between the purchaser and seller. 1.3 These test methods are used to evaluate whether the adhesion of a coating to a substrate is adequate for the user’s application. They do not distinguish between higher levels of adhesion for which more sophisticated methods of measurement are required. 1.4 This test method is similar in content (but not technically equivalent) to ISO 2409. 1.5 In multicoat systems adhesion failure may occur between coats so that the adhesion of the coating system to the substrate is not determined. 1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D3359-17 Referenced Document

  • ASTM D1000 Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
  • ASTM D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
  • ASTM D2092 Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting
  • ASTM D2370 Standard Test Method for Tensile Properties of Organic Coatings
  • ASTM D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape*2018-10-01 Update
  • ASTM D3924 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
  • ASTM D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
  • ASTM D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products*2022-06-01 Update
  • ASTM D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • ISO 2409 Paints and varnishes — Cross-cut test*2020-08-31 Update

ASTM D3359-17 history

  • 2023 ASTM D3359-23 Standard Test Methods for Rating Adhesion by Tape Test
  • 2022 ASTM D3359-22 Standard Test Methods for Rating Adhesion by Tape Test
  • 2017 ASTM D3359-17 Standard Test Methods for Rating Adhesion by Tape Test
  • 2009 ASTM D3359-09e2 Standard Test Methods for Measuring Adhesion by Tape Test
  • 2009 ASTM D3359-09e1 Standard Test Methods for Measuring Adhesion by Tape Test
  • 2009 ASTM D3359-09 Standard Test Methods for Measuring Adhesion by Tape Test
  • 2008 ASTM D3359-08 Standard Test Methods for Measuring Adhesion by Tape Test
  • 2007 ASTM D3359-07 Standard Test Methods for Measuring Adhesion by Tape Test
  • 2002 ASTM D3359-02 Standard Test Methods for Measuring Adhesion by Tape Test
  • 1997 ASTM D3359-97 Standard Test Methods for Measuring Adhesion by Tape Test
Standard Test Methods for Rating Adhesion by Tape Test



Copyright ©2024 All Rights Reserved