This Part of this European Standard specifies the general technical delivery conditions for open die steel forgings, ring rolled products and forged bars for pressure purposes. NOTE Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5. General information on technical delivery conditions is given in EN 10021.
EN 10222-1:2017 Referenced Document
2014/68/EU-2014 DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast; Text with EEA relevance)
EN 10020:2000 Definition and classification of grades of steel
EN 10021:2006 General technical delivery conditions for steel products*， 2024-04-20 Update
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10052:1993 Vocabulary of Heat Treatment Terms for Ferrous Products
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10204:2004 Metallic products - Types of inspection documents*， 2024-04-20 Update
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 10222-3:2017 Steel forgings for pressure purposes ? Part 3: Nickel steels with specified low temperature properties
EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN 10222-5:2017 Steel Forgings for Pressure Purposes - Part 5: Martensitic@ Austenitic and Austenitic-Ferritic Stainless Steels
EN 10228-1:2016 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2:2016 Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3:2016 Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4:2016 Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules ISO 15607: 2003*， 2024-04-20 Update
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)*， 2024-04-20 Update
EN ISO 15614-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (Incorporates Amendment A2: 2012)
EN ISO 3651-2:1998 Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Media Containing Sulfuric Acid ISO 3651-2:1998
EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 9606-1:2013 Qualification testing of welders - Fusion welding - Part 1: Steels*， 2024-04-20 Update
EN 10222-1:2017 history
2017EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
1998EN 10222-1:1998 Steel Forgings for Pressure Purposes - Part 1: General Requirements for Open Die Forgings (Incorporates Amendment A1: 2002)