This standard specifies the requirements on the initial and periodic tests and measurements of emissions and flue gas parameters at small firing installations according to the German Ordinance on Small and Medium Firing Installations (1. BImSchV) or the German Chimney Sweeping and Inspection Code (KüO) designed for the application of solid fuel. It applies to the determination of gaseous and particulate emissions at these installations. In addition, the monitoring tasks related to the technical condition and the operation of the installation to be treated in the preparation of the correct performance of the emission measurements are described. Furthermore, this standard deals with the particularities of single-room heaters for solid fuel. A standard test report on emission measurements at single-room heaters as well as criteria for the classification of single-room heaters are given in the Annex to this standard. The standard takes into account the catalogue of questions for the interpretation of requirements of the 1. BImSchV elaborated by the Federal and State Committee for Ambient Air Quality Protection (LAI). This catalogue also deals with questions related to emission monitoring. This standard is addressed primarily to chimney sweeps performing inspections at small firing installations according to 1. BImSchV and KüO as well as to the authorities and the authorised district chimney sweepers responsible for the monitoring of these installations.
DIN 51731:1996 Testing of solid fuels - Compressed untreated wood - Requirements and testing
DIN EN 1 Flued oil stoves with vaporizing burners; German version EN 1:1998+A1:2007 / Note: To be replaced by DIN EN 1 (2013-06).
DIN EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking; German version EN 303-5:2012
VDI 4207 Blatt 2-2016 history
2016VDI 4207 Blatt 2-2016 Emission measurements at small firing installations - Measurements at installations for solid fuel
2014VDI 4207 Blatt 2-2014 Messen von Emissionen an Kleinfeuerungsanlagen - Messen an Anlagen fuer feste Brennstoffe