ISO 1953:2015 PDF

Scope: This International Standard specifies reference methods for the size analysis of coal by manual sieving (wet or dry), using test sieves of aperture sizes between 125 mm and 45 μm. A guide to sampling is given in Annex A. This International Standard is applicable to all hard coals. It is not applicable to coke or other manufactured fuels. In the case of pulverized coal which has been ground so that a high proportion passes through the test sieve of smallest aperture size, the methods described in this International Standard will determine only the percentage oversize.

ISO 1953:2015 Referenced Document

ISO 1213-1:1993 Solid mineral fuels; vocabulary; part 1: terms relating to coal preparation
ISO 1213-2:1992 Solid mineral fuels; vocabulary; part 2: terms relating to sampling, testing and analysis
ISO 13909-1:2001 Hard coal and coke - Mechanical sampling - Part 1: General introduction
ISO 13909-2:2001 Hard coal and coke - Mechanical sampling - Part 2: Coal; Sampling from moving streams
ISO 13909-3:2001 Hard coal and coke - Mechanical sampling - Part 3: Coal; Sampling from stationary lots
ISO 13909-4:2001 Hard coal and coke - Mechanical sampling - Part 4: Coal; Preparation of test samples
ISO 13909-5:2001 Hard coal and coke - Mechanical sampling - Part 5: Coke; Sampling from moving streams
ISO 13909-6:2001 Hard coal and coke - Mechanical sampling - Part 6: Coke; Preparation of test samples
ISO 13909-7:2001 Hard coal and coke - Mechanical sampling - Part 7: Methods for determining the precision of sampling, sample preparation and testing
ISO 13909-8:2001 Hard coal and coke - Mechanical sampling - Part 8: Methods of testing for bias
ISO 18283:2006 Hard coal and coke - Manual sampling
ISO 3310-1:2000 Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
ISO 3310-2:2013 Test sieves.Technical requirements and testing.Part 2: Test sieves of perforated metal plate