International Organization for Standardization (ISO)
Latest
ISO 10771-1:2015
Scope
This part of ISO 10771 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads.
This part of ISO 10771 is only applicable to component pressure-containing envelopes that
— are manufactured from metals,
— are operated at temperatures that exclude creep and low-temperature embrittlement,
— are only subjected to pressure-induced stresses,
— are not subjected to loss of strength due to corrosion or other chemical action, and
— might include gaskets, seals, and other non-metallic components; however, these are not considered part of the pressure-containing envelope being tested (see 5.7).
This part of ISO 10771 does not apply to piping as defined in ISO 4413 (i.e. connectors, hose, tubing, pipe). See ISO 6803 and ISO 6605 for methods of fatigue testing of piping devices.
This part of ISO 10771 establishes a general test method that is applicable for many hydraulic fluid power components, but additional requirements or more specific methods that can be required for particular components are contained in the annexes or other standards.
Test pressure is to be determined by the user. See ISO/TR 10771-2 for a possible rating method.
ISO 10771-1:2015 Referenced Document
ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components
ISO 5598:2008 Fluid power systems and components - Vocabulary
ISO 6020-1:2007 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series
ISO 6605:2002 Hydraulic fluid power - Hoses and hose assemblies - Test methods
ISO 6803:2008 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
ISO 9110-1:1990 Hydraulic fluid power; measurement techniques; part 1: general measurement principles
ISO 9110-2:1990 Hydraulic fluid power; measurement techniques; part 2: measurement of average steady-state pressure in a closed conduit
ISO 10771-1:2015 history
2015ISO 10771-1:2015 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
2002ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method