DIN EN 15194:2018
Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2017
- Standard No.
- DIN EN 15194:2018
- Release Date
- 2018
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN 15194:2018-11
- Latest
- DIN EN 15194:2024-03
- Replace
- DIN EN 15194:2017
- Scope
- This European Standard is intended to cover electrically power assisted cycles of a type which have amaximum continuous rated power of 0,25 kW, of which the output is progressively reduced and finally cut offas the vehicle reaches a speed of 25 km/h, or sooner, if the cyclist stops pedalling. This European Standard specifies safety requirements and test methods for the assessment of the design andassembly of electrically power assisted bicycles and sub-assemblies for systems using battery voltage up to 48 VDC or integrated a battery charger with a 230 V input.This European Standard specifies requirements and test methods for engine power management systems,electrical circuits including the charging system for the assessment of the design and assembly of electricallypower assisted cycles and sub-assemblies for systems having a voltage up to and including 48 VDC orintegrated a battery charger with a 230 V input.
DIN EN 15194:2018 Referenced Document
- ASTM E467-08 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System*， 2024-04-20 Update
- EN 22248:1992 Packaging - Complete, Filled Transport Packages - Vertical Impact Test by Dropping (ISO 2248: 1985)
- EN 50272-4:2007 Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances
- EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods
- EN 55012:2007 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers (Incorporates Amendment A1: 2009)*， 2024-04-20 Update
- EN 55014-1:2017 Electromagnetic compatibility - Requirements for household appliances@ electric tools and similar apparatus - Part 1: Emission
- EN 55014-2:2015 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
- EN 55016-1-1:2010 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus (Incorporates Amendment A1: 2010)
- EN 55025:2008 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
- EN 60034-1:2010 Rotating electrical machines Part 1: Rating and performance
- EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
- EN 60335-1:2012 Safety of household and similar electrical appliances. Part 1: General requirements; includes modifications A11-1995; modifications A12-1996; modifications A13-1998; modifications A14-1998; modifications A15-2000; modifications A16- 2001; Modification A2-
- EN 60335-2-29:2004 Household and similar electrical appliances - Safety Part 2-29: Particular requirements for battery chargers (Incorporates Amendment A2: 2010)
- EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
- EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
- EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes@ voltage fluctuations and flicker in public low-voltage supply systems@ for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
- EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
- EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
- EN 61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
- EN 71-10:2005 Safety of toys - Part 10: Organic chemical compounds - Sample preparation and extraction*， 2024-04-20 Update
- EN 71-11:2005 Safety of toys - Part 11: Organic chemical compounds - Methods of analysis*， 2024-04-20 Update
- EN 71-12:2016 Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances
- EN 71-13:2014 Safety of toys - Part 13: Olfactory board games@ cosmetic kits and gustative games
- EN 71-4:2013 Safety of toys - Part 4: Experimental sets for chemistry and related activities
- EN 71-5:2015 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets
- EN 71-8:2018 Safety of toys - Part 8: Activity toys for domestic use
DIN EN 15194:2018 history
- 2024 DIN EN 15194:2024-03 Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2017+A1:2023
- 2022 DIN EN 15194/A2:2022-02 Cycles - Electrically power assisted cycles - EPAC Bicycles; German and English version EN 15194:2017/prA2:2022 / Note: Date of issue 2022-01-21*Intended as an amendment to DIN EN 15194 (2018-11).
- 2022 DIN EN 15194/A2:2022 Cycles - Electrically power assisted cycles - EPAC Bicycles; German and English version EN 15194:2017/prA2:2022
- 2021 DIN EN 15194/A1:2021-11 Cycles - Electrically power assisted cycles - EPAC Bicycles; German and English version EN 15194:2017/prA1:2021 / Note: Date of issue 2021-09-24*Intended as an amendment to DIN EN 15194 (2018-11).
- 2018 DIN EN 15194:2018-11 Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2017 / Note: To be amended by DIN EN 15194/A1 (2021-11), DIN EN 15194/A2 (2022-02).
- 2018 DIN EN 15194:2018 Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2017
- 2017 DIN EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2017
- 2012 DIN EN 15194:2012 Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2009+A1:2011
- 2009 DIN EN 15194:2009 Cycles - Electrically power assisted cycles - EPAC Bicycles; English version of DIN EN 15194:2009-06
