IEC 60335-2-114:2018 Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for self-balancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes
This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the electrical safety of self-balancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose; physical, sensory or mental capabilities; or; lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance; operational safety such as speed restriction, falling hazards, rapid acceleration. NOTE 101 Attention is drawn to the fact that; for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national transport authorities and similar authorities. NOTE 102 This standard does not apply to; appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
IEC 60335-2-114:2018 Referenced Document
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broad-band random and guidance
IEC 61558-2-10:2014 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1000 V
IEC 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations therof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
IEC 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
IEC 61558-2-14:2012 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and test for variable transformers and power supply units incorporating variable transformers
IEC 61558-2-15:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations
IEC 61558-2-16:2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
IEC 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
IEC 61558-2-20:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
IEC 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
IEC 61558-2-26:2013 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes
IEC 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporationg control transformers
IEC 61558-2-3:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners
IEC 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
IEC 61558-2-5:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformators for shavers, power supply units for shavers and shaver supply units
IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
IEC 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys
IEC 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations therof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
IEC 61558-2-9:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
IEC 62133-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
IEC 62133-2:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
IEC 60335-2-114:2018 history
2022IEC 60335-2-114:2022 Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for Personal-e-Transporters
2018IEC 60335-2-114:2018 Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for self-balancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes