ISO 13802:2015
Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing

Standard No.

ISO 13802:2015

Release Date

2015

Published By

International Organization for Standardization (ISO)

Status

Be replaced

Replace By

ISO 13802:2015/Amd 1:2016

Latest

ISO 13802:2015/Amd 1:2016

Scope

This International Standard specifies frequency and methods for the verification of pendulum impacttesting machines used for the Charpy impact test, Izod impact test, and tensile impact test described covered insofar as the geometrical and physical properties of instrumented machines are identical to non instrumented machines. The force/work verification of instrumented machines is not covered in this International Standard. This International Standard is applicable to pendulum-type impact-testing machines, of different capacities and/or designs, with the geometrical and physical properties defined in Clause 5. Methods are described for verification of the geometrical and physical properties of the different parts of the test machine. The verification of some geometrical properties is difficult to perform on the assembled instrument. It is, therefore, assumed that the manufacturer is responsible for the verification of such properties and for providing reference planes on the instrument that enable proper verification in accordance with this International Standard. These methods are for use when the machine is being installed, has been repaired, has been moved, or is undergoing periodic checking. A pendulum impact-testing machine verified in accordance with this International Standard, and assessed as satisfactory, is considered suitable for impact testing with unnotched and notched test specimens of different types. Annex A details design requirements for Charpy testing machines. Annex B details design requirements for Izod testing machines. Annex C details design requirements for tensile impact machines. Annex D explains how to calculate the ratio of frame mass to pendulum mass required to avoid errors in the impact energy. Annex E explains deceleration of pendulum during impact. Annex F details design requirements for one type of gauge used to verify striker and anvil/support alignment for Charpy testing machine.

ISO 13802:2015 Referenced Document

• ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
• ISO 179-2:1997 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
• ISO 180:2000 Plastics - Determination of Izod impact strength
• ISO 8256:2004 Plastics - Determination of tensile-impact strength

ISO 13802:2015 history

• 2016 ISO 13802:2015/Amd 1:2016 Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
• 2015 ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
• 2000 ISO 13802:1999/cor 1:2000 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1
• 1999 ISO 13802:1999 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing