EN ISO 4017:2014 PDF

Scope: This International Standard specifies the characteristics of hexagon head screws with thread to head and threads from M1.6 to M64, with product class A for threads from M1.6 to M24 and nominal lengths 10 d or 150 mm, whichever is the smaller, and with product class B for Threads over M24 or nominal lengths > 10 d or 150 mm, whichever is smaller, are fixed. NOTE These hexagon head screws correspond to those according to ISO 4014. They only have threads up to the head and are commercially only specified in nominal lengths of up to 200 mm. If, in special cases, specifications other than those listed in this standard are required, these can be found in the relevant ISO standards, e.g. B. ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1, ISO 4753 and ISO 4759-1.

EN ISO 4017:2014 Referenced Document

ISO 10683:2014 Fasteners - Non-electrolytically applied zinc flake coatings
ISO 10684:2004 Fasteners - Hot dip galvanized coatings
ISO 225:2010 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
ISO 3269:2000 Fasteners - Acceptance inspection
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs
ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
ISO 4042:1999 Fasteners - Electroplated coatings
ISO 4753:2011 Fasteners - Ends of parts with external ISO metric thread
ISO 4759-1:2000 Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C
ISO 6157-1:1988 Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements
ISO 724:1993 ISO general-purpose metric screw threads; basic dimensions
ISO 8839:1986 Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 8992:2005 Fasteners - General requirements for bolts, screws, studs and nuts
ISO 965-1:2013 ISO general purpose metric screw threads.Tolerances.Part 1: Principles and basic data

2022 EN ISO 4017:2022 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022)
2014 EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
2011 EN ISO 4017:2011 Hexagon head screws - Product grades A and B
2000 EN ISO 4017:2000 Hexagon Head Screws - Product Grades A and B ISO 4017:1999; Supersedes 24017:1991