EN 1601:2014
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)

Standard No.
EN 1601:2014
Release Date
2014
Published By
European Committee for Standardization (CEN)
Status
Replace By
EN 1601:2014/AC:2014
Latest
EN 1601:2017
Replace
FprEN 1601-2013
Scope
This European Standard specifies a gas chromatographic method for the quantitative determination, in unleaded petrol having a final boiling point not greater than 220 °C, of individual organic oxygenate compounds in the range 0,17 % (m/m) to 15 % (m/m) in a direct analysis (without dilution), and total organically bound oxygen up to 3,9 % (m/m). For samples for which one of the oxygenate compounds content is higher than 15 % (m/m), a procedure with a dilution of the sample before the analysis is given. NOTE 1 Precision data are not available for an oxygenate compound content higher than 15 % (m/m); see Foreword. NOTE 2 For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction. WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

EN 1601:2014 Referenced Document

  • EN 228:2012 Automotive fuels - Unleaded petrol - Requirements and test methods*2024-04-20 Update
  • EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
  • EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
  • EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
  • EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
  • EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of desity or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)

EN 1601:2014 history

  • 2017 EN 1601:2017 Liquid Petroleum Products - Unleaded Petrol - Determination of Organic Oxygenated Compounds and Total Organically Bound Oxygen Content by Gas Chromatography (O-FID)
  • 2014 EN 1601:2014/AC:2014 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
  • 2014 EN 1601:2014 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)



Copyright ©2024 All Rights Reserved