ASTM A760/A760M-15
Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- Standard No.
- ASTM A760/A760M-15
- Release Date
- 2015
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM A760/A760M-15(2020)
- Latest
- ASTM A760/A760M-15(2020)
- Scope
1.1 This specification covers corrugated steel pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. The steel sheet used in fabrication of the pipe has a protective metallic coating of zinc (galvanizing), aluminum, 558201;% aluminum-zinc alloy, or zinc-58201;% aluminum-mischmetal alloy.
1.2 The several different metallic coatings may not provide equal protection of the base metal against corrosion or abrasion in all environments, or both. Some environments may be so severe that none of the metallic coatings included in this specification will provide adequate protection. Additional protection for corrugated steel pipe can be provided by use of coatings applied after fabrication of the pipe as described in Specification A849, or by use of polymer precoated corrugated steel pipe as described in Specification A762/A762M.
1.3 Section 9 is intended to be applied to corrugated steel pipe joints. The several different types of corrugated steel pipe joints provide various qualities. This specification is not intended for routine quality control testing or in-field acceptance testing, but is intended to establish performance limits of the pipe joints, as well as the test requirements and test methods for the joints as described herein.
1.4 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and sheet thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The installation procedure is described in Practice A798/A798M.
1.5 This specification is applicable to orders in either inch-pound units as A760 or in SI units as A760M. Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text for clarity, but they are the applicable values when the material is ordered to A760M.
ASTM A760/A760M-15 Referenced Document
- ASTM A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- ASTM A307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth
- ASTM A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
- ASTM A449 Standard Specification for Quenched And Tempered Steel Bolts And Studs
- ASTM A563 Standard Specification for Carbon and Alloy Steel Nuts
- ASTM A563M Standard Specification for Carbon and Alloy Steel Nuts 40;Metric41;
- ASTM A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
- ASTM A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
- ASTM A780 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- ASTM A796/A796M Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
- ASTM A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
- ASTM A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe*， 2024-04-20 Update
- ASTM A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- ASTM A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
- ASTM B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- ASTM C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures
- ASTM D1056 Standard Specification for Sponge and Expanded Cellular Rubber Products
- ASTM F568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
ASTM A760/A760M-15 history
- 2020 ASTM A760/A760M-15(2020) Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2015 ASTM A760/A760M-15 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2013 ASTM A760/A760M-13 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2010 ASTM A760/A760M-10 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2009 ASTM A760/A760M-09 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2006 ASTM A760/A760M-06 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2001 ASTM A760/A760M-01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2001 ASTM A760/A760M-01 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- 2000 ASTM A760/A760M-00 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
