DIN VDE 0603-3-2:2017
Meter panels - Part 3-2: Device for mounting and connection (BKE) of electronic meters (eHZ) for household use on meter panels

Standard No.

DIN VDE 0603-3-2:2017

Release Date

2017

Published By

German Institute for Standardization

Latest

DIN VDE 0603-3-2:2017

Replace

DIN VDE 0603-3-2:2016 DIN VDE 0603-5:2013

Scope

This standard applies to equipment for mounting and connecting of electricity meters on meter panels.

DIN VDE 0603-3-2:2017 Referenced Document

• DIN 18015-1:2013 Electrical installations in residential buildings - Part 1: Planning principles
• DIN 43853:1988 Meter boards; main dimensions and termination dimension
• DIN 43856:1989 Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagrams
• DIN 43857-1:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase meters
• DIN 43857-2:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase meters
• DIN 43857-4:1974 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters
• DIN 43870-2:1991 Meter mounting boards; functional area
• DIN 43880:1988 Built-in equipment for electrical installations; overall dimensions and related mounting dimensions
• DIN 46228-1:1992 Tubular end-sleeves without plastic sleeve
• DIN 46228-2:1992 Crimp-type end-splices, with and without insulation grip
• DIN 46228-3:1992 Conductor-embracing end-splices, without insulation grip
• DIN 46228-4 Berichtigung 1:2015 Tubular end-sleeves with plastic sleeve, Corrigendum to DIN 46228-4:1990-09
• DIN 46228-4:1990 Tubular end-sleeves with plastic sleeve
• DIN EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005
• DIN EN 60068-2-75:2015 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests (IEC 60068-2-75:2014); German version EN 60068-2-75:2014
• DIN EN 60529:2014 Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989 + A1:1999 + A2:2013); German version EN 60529:1991 + A1:2000 + A2:2013
• DIN EN 60664-1:2008 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:2007); German version EN 60664-1:2007
• DIN EN 60715:2001 Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations (IEC 60715:1981 + A1:1995); German version EN 60715:2001
• DIN EN 60998-1:2005 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements (IEC 60998-1:2002, modified); German version EN 60998-1:2004
• DIN EN 60999-1:2000 Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm<(hoch)2> up to 35 mm<(hoch)2> (inclu
• DIN EN 61169-1:2014 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods (IEC 61169-1:2013); German version EN 61169-1:2013
• DIN VDE 0603-1:2017 Meter panels - Part 1: General requirements
• DIN VDE 0603-2-1:2017 Meter panels - Part 2-1: Meter panels for direct measurement up to 63 A

DIN VDE 0603-3-2:2017 history

• 2017 DIN VDE 0603-3-2:2017 Meter panels - Part 3-2: Device for mounting and connection (BKE) of electronic meters (eHZ) for household use on meter panels
• 0000 DIN VDE 0603-3-2:2016
• 2013 DIN VDE 0603-5:2013 Consumer distribution boards and meter panels AC 400 V - Part 5: Device for mounting and connection (BKE) of electronic meters (eHZ) for household use on meter panels
• 0000 DIN VDE 0603-5:2012
• 0000 DIN V VDE V 0603-5:2010