ASTM E3124-17
Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose

Standard No.

ASTM E3124-17

Release Date

2017

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM E3124-17

Scope

5.1 Optical tracking systems are used in a wide range of fields including: video games, film, neuroscience, biomechanics, flight/medical/industrial training, simulation, robotics, and automotive applications.

5.2 This standard provides a common set of metrics and a test procedure for evaluating the performance of optical tracking systems and may help to drive improvements and innovations in optical tracking systems.4

5.3 Potential users often have difficulty comparing optical tracking systems due to the lack of standard performance metrics and test methods, and must therefore rely on the vendor claims regarding the system’s performance, capabilities, and suitability for a particular application. This standard makes it possible for a user to assess and compare the performance of optical tracking systems, and allows the user to determine if the measured performance results are within the specifications with regard to the application requirements.

1.1 Purpose—This test method presents metrics and a procedure for measuring, analyzing, and reporting the system latency of an optical tracking system (OTS) that computes the pose of a rigid object.

1.2 Usage—System vendors may use this test method to determine or validate the system latency in their tracking systems. This test method provides a uniform way to measure and report the system latency along with the uncertainty in the system latency. System users may use this test method to verify that the system latency performance is within the user’s specific requirements and within the system’s rated performance.

1.3 This standard does not measure the display latency of graphical representations of the tracked objects. Display latency is external to the optical tracking system.

1.4 Test Location—The procedures defined in this test method shall be performed in an environment conforming to the manufacturer’s rated conditions.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E3124-17 Referenced Document

• ASME B89.4.19 Performance Evaluation of Laser-Based Spherical Coordinate Measurement Systems*， 2024-04-20 Update
• ASTM E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
• ASTM E2655 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
• ASTM E2919 Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose
• ASTM E3064 Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose

ASTM E3124-17 history

• 2017 ASTM E3124-17 Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose