This International Standard defines terms regarding industrial woven wire cloth for screening purposes and specifies maximum permissible error, requirements, and test methods. It applies to industrial woven wire cloth with square apertures, made of steel, stainless steel, or non-ferrous metals (see ISO 4783 2). It does not apply to woven wire cloth coated after weaving nor does it apply to pre-crimped and welded wire screens which are covered in ISO 4783 3 and ISO 14315. It is of limited application to woven wire cloth used for purposes other than screening which may necessitate other requirements. The alternative requirements may be agreed between the purchaser and the supplier at the time of placing the order.
DIN ISO 9044:2017 Referenced Document
EN 10204:2004 Metallic products - Types of inspection documents*, 2024-04-20 Update
ISO 14315:1997 Industrial wire screens - Technical requirements and testings
ISO 2194:1991 Industrial screens; woven wire cloth, perforated plate and electroformed sheet; designation and nominal sizes of openings
ISO 4782:1987 Metal wire for industrial wire screens and woven wire cloth
ISO 4783-1:1989 Industrial wire screens and woven wire cloth; guide to the choice of aperture size and wire diameter combinations; part 1: generalities
ISO 4783-2:1989 Industrial wire screens and woven wire cloth; guide to the choice of aperture size and wire diameter combinations; part 2: preferred combinations for woven wire cloth
ISO 4783-3:1981 Industrial wire screens and woven wire cloth; Guide to the choice of aperture size and wire diameter combinations; Part 3 : Preferred combinations for pre-crimped or pressure-welded wire screens