This standard is intended to be used for rubber and plastic hose assemblies of the types: 1ST, 1SN, 2ST and 2SN according to DIN EN 853, 1TE, 2TE and 3TE according to DIN EN 854, 4SP, 4SH, R13 according to DIN EN 856, R15 according to ISO 3862 and 1SC and 2SC according to DIN EN 857 as well as plastic hoses assemblies of the types R7, R8 and R18 according to ISO 3949, appropriate for temperatures of -40° C up to + 100° C (hose types R13 and R 15 to 120°C) and hose connectors of the light and heavy duty series according to DIN ISO 12151-2 and DIN ISO 12151-3. This standard contains information about the most important criteria for selection and reference of hoses and connectors, the installation and connection dimensions as well as the requirements for the installation of hose assemblies. The comparative presentation of respective hoses types in Table 1 and Table 2 gives designers guidelines for the selection of hoses (nominal diameter and design) and their appropriate connectors, in case the piping of a system has already been determined. Further, guidelines are given in this standard for storage, life cycle and necessary inspections to ensure the full functionality of those assemblies.
DIN 20066:2017 Referenced Document
DIN 7716:1982 Rubber products; requirements for storage, cleaning and maintenance
DIN EN 853:2016 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:2015
DIN EN 854:2016 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:2015
DIN EN 856:2016 Ruber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:2015
DIN EN 857:2016 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:2015
DIN EN ISO 3949:2014 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009); German version EN ISO 3949:2014
DIN EN ISO 4413:2011 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010); German version EN ISO 4413:2010
DIN EN ISO 8331:2017 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016); German version EN ISO 8331:2016
DIN EN ISO 8434-1:2008 Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007
DIN ISO 10763:2004 Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994)
DIN ISO 12151-2:2004 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
DIN ISO 12151-3:2012 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010)
ISO 3862:2017 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification
ISO 5598:2008 Fluid power systems and components - Vocabulary
ISO 6162-1:2012 Hydraulic fluid power.Flange connections with split or one-piece flange clamps and metric or inch screws.Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 6162-2:2012 Hydraulic fluid power.Flange connections with split or one-piece flange clamps and metric or inch screws.Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76