ISO 25649-1:2017
Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods

Standard No.

ISO 25649-1:2017

Release Date

2017

Published By

International Organization for Standardization (ISO)

Latest

ISO 25649-1:2017

Scope

This document specifies safety requirements and test methods related to materials, safety, performance for classified floating leisure articles for use on and in water in accordance with Clause 4 (see Table 1). This document is only applicable with ISO 25649-2 and the relevant specific parts (ISO 25649-3 to NOTE 1 Specific safety requirements are specified in ISO 25649-3 to ISO 25649-7. NOTE 2 The specific parts can include exclusions from the general requirements specified in this document and/or ISO 25649-2. This document is not applicable to: — aquatic toys according to European Directive 2009/48/EC (use in shallow waters/use under supervision); — inflatable boats with a buoyancy > 1800 N according to European Directive 94/25/EC; — buoyant aids for swimming instructions according to European Directive 89/686/EEC; — air mattresses which are not specifically designed or intended for use on the water (e.g. velour bed, self inflating mattress and rubberized cotton air mattress); — floating seats for angling purposes; — surf sports type devices (e.g. body boards, surf boards); — water ski, wakeboard or kite surfing board; — devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic; — devices which are kept in shape by permanent air flow; — rings intended for use on water slides; — wading devices.

ISO 25649-1:2017 Referenced Document

• EN 12402:1999 Lead and lead alloys - Methods of sampling for analysis
• EN 13138-1:2014 Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
• EN 13138-2:2014 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
• EN 13138-3:2014 Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn
• EN 14960:2013 Inflatable play equipment - Safety requirements and test methods
• EN 16051-1:2012 Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters
• EN 16051-2:2012 Inflation devices and accessories for inflatable consumer products - Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators
• EN 20105-A02:1994 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
• EN 20105-A03:1994 Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining (ISO 105-A03:1993)
• EN 71-1:2005 Safety of toys - Part 1: Mechanical and physical properties Incorporates Amendment A9: 2009*， 2024-04-20 Update
• ISO 105-E03:2010 Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water)
• ISO 105-E04:2013 Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration
• ISO 105-X12:2016 Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
• ISO 1817:2015 "Rubber, vulcanized or thermoplastic - Determination of the effect of liquids"
• ISO 2411:2000 Rubber- or plastics-coated fabrics - Determination of coating adhesion
• ISO 25649-2:2017 Floating leisure articles for use on and in the water - Part 2: Consumer information
• ISO 3011:1997 Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
• ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
• ISO 4675:1990 Rubber- or plastics-coated fabrics; low-temperature bend test
• ISO 554:1976 Standard atmospheres for conditioning and/or testing; Specifications
• ISO 6185-1:2001 Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW
• ISO 6185-2:2001 Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive
• ISO 6185-3:2014 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
• ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
• ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

ISO 25649-1:2017 history

• 2017 ISO 25649-1:2017 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods