DIN EN 12831-1:2017
Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3; German version EN 12831-1:2017

Standard No.

DIN EN 12831-1:2017

Release Date

2017

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN 12831-1:2017-09

Latest

DIN EN 12831-1:2017-09

Replace

DIN EN 12831:2003 DIN EN 12831-1:2014

Scope

This standard specifies methods for calculating the design heat loss and the design heat load for basic cases at the design conditions. Basic cases comprise all buildings:- with a limited room height (not exceeding 5 m);- assumed to be heated to steady state conditions under the design conditions. Examples of such buildings are: residential buildings; office and administration buildings; schools; libraries; hospitals; recreational buildings; prisons; buildings used in the catering trade; department stores and other buildings used for business purposes; industrial buildings.In the annexes, information is also given for dealing with the following special cases:- high ceiling buildings or large enclosure;- buildings where air temperature and mean radiant temperature differ significantly.

DIN EN 12831-1:2017 Referenced Document

• EN 12524:2000 Building Materials and Products - Hygrothermal Properties - Tabulated Design Values
• EN 12831-1:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load@ Module M3-3
• EN 12831-3:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
• EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression@ Module M3-1@ M3-4@ M3-9@ M8-1@ M8-4
• EN 15316-2:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling)@ Module M3-5@ M4-5
• EN 15316-3:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW@ heating and cooling)@ Module M3-6@ M4-6@ M8-6
• EN 15316-4-10:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems@ Module M11-8-7
• EN 15316-4-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
• EN 15316-4-2:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems@ heat pump systems@ Module M3-8-2@ M8-8-2
• EN 15316-4-3:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems@ thermal solar and photovoltaic systems@ Module M3-8-3@ M8-8-3@ M11-8-3
• EN 15316-4-4:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems@ building-integrated cogeneration systems@ Module M8-3-4@ M8-8-4@ M8-11-4
• EN 15316-4-5:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
• EN 15316-4-8:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems@ air heating and overhead radiant heating systems@ including stoves (local)@ Module M3-8-8
• EN 15316-5:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling)@ Module M3-7@ M8-7
• EN 15378-1:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers@ heating systems and DHW@ Module M3-11@ M8-11
• EN 15378-3:2017 Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance@ Module M3-10@ M8-10
• EN 15459-1:2017 Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14
• EN 673:2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method
• EN ISO 10077-1:2006 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2006)
• EN ISO 10077-2:2012 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (Incorporating corrigendum July 2012)
• EN ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations*， 2024-04-20 Update
• EN ISO 10456:2007 Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)*， 2024-04-20 Update
• EN ISO 13370:2007 Thermal performance of buildings - Heat transfer via the ground - Calculation methods
• EN ISO 13789:2007 Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method*， 2024-04-20 Update
• EN ISO 6946:2007 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method*， 2024-04-20 Update
• EN ISO 7345:1995 Thermal Insulation - Physical Quantities and Definitions ISO 7345 : 1987
• EN ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria*， 2024-04-20 Update
• EN ISO 9972:2015 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:2015)

DIN EN 12831-1:2017 history

• 2017 DIN EN 12831-1:2017-09 Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3; German version EN 12831-1:2017
• 2017 DIN EN 12831-1:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3; German version EN 12831-1:2017
• 1970 DIN EN 12831-1 E:2014-11 Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3
• 2014 DIN EN 12831-1 E:2014 Draft Document - Heating systems and water based cooling systems in buildings - Method for calculation of the design heat load - Part 1: Space heating load; German version prEN 12831-1:2014
• 2003 DIN EN 12831:2003 Heating systems in buildings - Method for calculation of the design heat load; German version EN 12831:2003
• 0000 DIN EN 12831:1997
• 0000 DIN 4701-2:1995
• 1970 DIN 4701-3:1989
• 1970 DIN 4701-2:1983