ASTM D2867-17
Standard Test Methods for Moisture in Activated Carbon
- Standard No.
- ASTM D2867-17
- Release Date
- 2017
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D2867-23
- Latest
- ASTM D2867-23
- Scope
-
4.1 The moisture content of activated carbon is often required to define and express its properties in relation to the net weight of the carbon.
4.2 The moisture content of activated carbon packed in typical shipping containers will usually increase during transportation and storage. Users of activated carbon in applications where low moisture content is important should be aware of this effect.
1.1 These test methods provide two procedures for the determination of the moisture content of activated carbon.2 The procedures may also be used to dry samples required for other tests. The oven drying method is used when water is the only volatile material present and is in significant quantities, and the activated carbon is not heat sensitive (some activated carbons can ignite spontaneously at temperatures as low as 1508201;°C). The xylene extraction method is used when a carbon is known or suspected to be heat sensitive or to contain nonwater-miscible organic compounds instead of or in addition to water. The oven drying method described in these test methods may be used as the reference for development of instrumental techniques for moisture determination in activated carbon.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D2867-17 Referenced Document
- ASTM E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D2867-17 history
- 2023 ASTM D2867-23 Standard Test Methods for Moisture in Activated Carbon
- 2017 ASTM D2867-17 Standard Test Methods for Moisture in Activated Carbon
- 2009 ASTM D2867-09(2014) Standard Test Methods for Moisture in Activated Carbon
- 2009 ASTM D2867-09 Standard Test Methods for Moisture in Activated Carbon
- 2004 ASTM D2867-04 Standard Test Methods for Moisture in Activated Carbon
- 1999 ASTM D2867-99 Standard Test Methods for Moisture in Activated Carbon
