This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in drainage systems and the appropriate test methods to determine these characteristics. The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation and drainage. The separation function is always used in conjunction with filtration or drainage. Accordingly, separation will never be specified alone. This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318-1. This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures. This European Standard defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties. Particular application cases may contain requirements regarding additional properties and - preferably standardized - test methods, if they are technically relevant. This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997-1 (Eurocode 7), e. g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.
EN 13252:2016 Referenced Document
ASTM D4603-03 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer*， 2024-04-20 Update
ASTM D7409-15 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns*， 2024-04-20 Update
EN 12224:2000 Geotextiles and geotextile-related products - Determination of the resistance to weathering
EN 12225:2000 Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test
EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
EN 12447:2001 Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water*， 2024-04-20 Update
EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN 13253:2016 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 13256:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 14030:2001 Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (Incorporates Amendment A1: 2003)*， 2024-04-20 Update
EN 1997-1:2004 Eurocode 7 - Geotechnical design - Part 1: General rules*， 2024-04-20 Update
EN ISO 10318-1:2015 Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)
EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
EN ISO 10320:1999 Geotextiles and Geotextile-Related Products - Identification on Site SUPERSEDES EN 30320:1993; ISO 10320:1999
EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
EN ISO 1043-1:2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)*， 2024-04-20 Update
EN ISO 10722:2007 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007)
EN ISO 11058:2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010)
EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
EN ISO 12956:2010 Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010)
EN ISO 12957-1:2005 Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test
EN ISO 3696:1995 Water for Analytical Laboratory Use- Specification and Test Methods (ISO 3696 : 1987)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens
EN 13252:2016 history
2016EN 13252:2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
2015EN 13252:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
2014EN 13252:2014 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems (Incorporates Amendment A1: 2015)
2000EN 13252:2000 Geotextiles and geotextile-related products ?Characteristics required for use in drainage systems Includes Amendment A1: 2005