VDI/VDE 2630 Blatt 1.1-2016
Computed tomography in dimensional measurement - Fundamentals and definitions

Standard No.
VDI/VDE 2630 Blatt 1.1-2016
Release Date
2016
Published By
Association of German Mechanical Engineers
Latest
VDI/VDE 2630 Blatt 1.1-2016
Replace
VDI/VDE 2630 Blatt 1.1-2009 VDI/VDE 2630 Blatt 1.1-2014
Scope
The standard defines terms of industrial computed tomography (CT). The CT application for the dimensional measurement (e.g. length or angle) of components is the main focus. The defined terms are also applicable to other CT applications. They are sorted into the following general subject areas: general terms and definitions, radiation sources, radiation detectors, scan parameters, image reconstruction, artefacts and dimensional measuring; so that a simple assignment is guaranteed. In addition, an index supports fast retrieval of certain terms. Corresponding descriptions and where necessary associated symbols are presented for the respective terms.

VDI/VDE 2630 Blatt 1.1-2016 Referenced Document

  • DIN 6814-1:2005 Terms in the field of radiological technique - Part 1: Regions of application
  • DIN EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999
  • DIN EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; English version of DIN EN 12543-2:2008-10
  • DIN EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method; German version EN 12543-3:1999
  • DIN EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method; German version EN 12543-4:1999
  • DIN EN 12543-5:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes; German version EN 12543-5:1999
  • DIN EN 12544-1:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method; German version EN 12544-1:1999
  • DIN EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method; German version EN 12544-2:2000
  • DIN EN 12544-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method; German version EN 12544-3:1999
  • DIN EN 12679:1999 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method; German version EN 12679:1999
  • DIN EN 13068-1:2000 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties; German version EN 13068-1:1999
  • DIN EN 13068-2:2000 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices; German version EN 13068-2:1999
  • DIN EN 1330-10:2003 Non-destructive testing - Terminology - Part 10: Terms used in visual testing; Trilingual version EN 1330-10:2003
  • DIN EN 1330-11:2007 Non-destructive testing - Terminology - Part 11: Terms used in X-ray diffraction from polycristalline and amorphous materials; Trilingual version EN 1330-11:2007
  • DIN EN 1330-1:2015 Non destructive testing - Terminology - Part 1: List of general terms; Trilingual version EN 1330-1:2014
  • DIN EN 1330-2:1998 Non-destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods; Trilingual version EN 1330-2:1998
  • DIN EN 1330-3:1997 Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing; Trilingual version EN 1330-3:1997
  • DIN EN 1330-4:2010 Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing; Trilingual version EN 1330-4:2010
  • DIN EN 1330-8:1998 Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing; Trilingual version EN 1330-8:1998
  • DIN EN 1330-9:2009 Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing; Trilingual version EN 1330-9:2009
  • DIN EN ISO 10360-1:2003 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002
  • DIN EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009); German version EN ISO 10360-2:2009
  • DIN EN ISO 10360-3:2000 Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000); German version EN ISO 10360-3:2000
  • DIN EN ISO 10360-4:2003 Geometrical Product Specifications (GPS) - Acceptance test and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning mode (ISO 10360-4:2000 + Cor. 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-4

VDI/VDE 2630 Blatt 1.1-2016 history

Computed tomography in dimensional measurement - Fundamentals and definitions


Copyright ©2024 All Rights Reserved