ASTM D1630-16
Standard Test Method for Rubber Property&x2014;Abrasion Resistance (Footwear Abrader)
- Standard No.
- ASTM D1630-16
- Release Date
- 2016
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D1630-16(2021)
- Latest
- ASTM D1630-16(2021)
- Scope
3.1 It is recognized that when comparing different types of rubber materials, the service performance may not correlate to the results of this predictive test.
3.2 This test method should not be used as a measure of abrasion resistance for compositions that differ markedly from the standard reference compound. Misleading results, for example, are obtained from polyurethane compositions when compared with the standard reference compound.
3.3 Some specimens may bounce (chatter) against the abrasive paper, producing inaccurate results. These should be interpreted with care and the condition reported.
3.4 If test results are inconsistent, the specimens should be cut, after the test is run, and inspected for voids. If any voids are present, the results should be disregarded and the test repeated using test specimens that are free from voids.
1.1 This test method covers the determination of the resistance to abrasion of vulcanized rubber, or other rubber materials that are similar to the standard reference compound, used for the soles and heels of footwear. It is not recommended for materials less than 2.5 mm (0.1 in.) in thickness.
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D1630-16 Referenced Document
- ASTM D1349 Standard Practice for Rubber-Standard Temperatures for Testing
- ASTM D2240 Standard Test Method for Properties of Rubber &8212; Durometer Hardness*， 2024-04-20 Update
- ASTM D4483 Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM D1630-16 history
- 2021 ASTM D1630-16(2021) Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
- 2016 ASTM D1630-16 Standard Test Method for Rubber Property&x2014;Abrasion Resistance (Footwear Abrader)
- 2006 ASTM D1630-06(2012) Standard Test Method for Rubber Propertymdash;Abrasion Resistance (Footwear Abrader)
- 2006 ASTM D1630-06 Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader)
- 1994 ASTM D1630-94(2000) Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader)
